ColdJ's Military Planes Chinese CKAN

Hi and welcome to the full release of the Chinese Supplement of ColdJ's Military Planes. A Kerbal knockoff of both the Chinese J-20 Fith Generation fighter and the J-10. Everything is noded to click together and be ready to go. The missile hinge for the J-20 should be the only thing that requires a few turns to be right way out and of course the usual 90 degree turn clockwise on all landing gear that is standard in KSP. Have added nav lights to the J-20 that weren't there in the pre-release.

The J-10 has nodes for everything and plenty for weapons rails and other BD Armory stuff. I have also included a dual node weapons rail that can take 2 missiles at once. The rails and drop tank have decouplers and they should have their staging turned off if you don't wish to drop everything on starting out on a runway.

J-20 missile and bomb bays are on separate toggles and there are 4 nodes in the bomb bay for the piston rails from my earlier plane mods. They are up inside the body and won't be obvious until you look inside the model.

Have also included 2 go anywhere nav lights that can go on anything you want.

The J-20 wing nodes were slightly shifted to be closer to the skin . Just allow the folders to overwrite the previous if you have the pre-release. Planes you might already have setup shouldn't be broken by this as all model names are the same . J-20 still has the same 6 skin variants. The J-10 has 2.

Hope you enjoy these.

Craft folder in main folder with 1 of each built. Just copy to your saves SPH folder.

The internals are stock but if you have Raster Prop Monitor installed then the blank monitors will be replaced with multifunction ones. https://spacedock.info/mod/2534/RasterPropMonitor

Breaking ground is a requirement for the missile hinge to work.

This works great and is stable on stock vanilla KSP. If you have mods that change game physics, I hope it all still works but you will need to find out for yourself. If you are someone that likes the doors to snap open then there is a solution in the forum thread from a previous question for an earlier mod.

Please only bring up problems if you have tried it on a stock only install and have a problem.

Type J10 for all J-10 stuff, J20 for all J-20 stuff.