ShadowWorks Stockalike SLS and More CKAN

A parts pack that adds Space Shuttle related parts, SLS and Orion parts, and ISS-like station parts and more.

License: Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License

Game Version: 1.12.2

Downloads: 28,457

Author: TheShadow1138

Mod Website: Forum Thread

Followers: 62

Outdated Mod

This mod is not known to work with the latest version of Kerbal Space Program. Proceed with caution.

Information Changelog Stats

This is a parts pack that adds a stock alike version of the SLS in 5m size as well as a few Space Shuttle specific parts that will allow you to build the Block I SLS with the complete Orion Spacecraft (CM, SM, and LAS), as well as a full Space Shuttle stack with an External Tank and SRBs that are 5m and 2.25m respectively to be in scale with the Mk3 Spaceplane parts. It now also includes the parts necessary to build the Block IA and Block II SLS, Delta IV (Medium, Medium+, and Heavy configurations), Ares I, and ISS-like Station Modules and Truss components. The mod now includes parts to construct the DIRECT Jupiter launch vehicles as well as the Altair Lunar Lander.

Mod Review by jd9921

New Screenshots

Amun-Ra Block I

Amun-Ra Block I w/Racing Stripe Boosters

Amun-Ra Block IB w/Horus Lander

Amun-Ra Block IB Crew Alternate Black and White Textures

Bastet IV Heavy flying the EFT-1 mission with an Osiris spacecraft test article

Bastet IV Medium

Osiris Capsule showing off the mirrored finish

Horus Lander with Jeb and Val on the Mun

MAS IVA for the Osiris Capsule (MOARdV Avionics Systems Required)

MAS IVA for the Horus Lander (MOARdV Avionics Systems Required)

Version for Kerbal Space Program 1.12.2

Released on 2021-11-08


  • Re-added the Connected Living Spaces compatibility patch that got left out of v2.0.5

Download (16.49 MiB)

Version 2.0.5 for Kerbal Space Program 1.12.2

Released on 2021-11-08

Changes 2.0.5

  • Added Waterfall FX compatibility patch - converts all engines and RCS thrusters except for SRBs to Waterfall FX.
  • Fixed texture issue with the 5m Amun-Ra (SLS) Fairing. The texture will now appear correctly in 1.12+.
  • Updated the SSMEMount part to use transform-based attachment nodes.

Download (16.48 MiB)

Version for Kerbal Space Program 1.11.2

Released on 2021-02-15


  • Added Connected Living Space (CLS) compatibility patch (will only work if CLS is installed).

Download (15.45 MiB)

Version 2.0.4 for Kerbal Space Program 1.11.1

Released on 2021-02-02

Changes 2.0.4

ISS SAW Fix thanks to Hachiro * Re-exported the ISS SAW (Solar Array Wing) part * Now uses a single attachment node (no longer surface attach) * PAW text updated for easier readability and more informative operation * Deploying the Array plays the full deployment animation once, while the panels won't actually rotate independently and collect sunlight until they are activated. * Should remain deployed regardless of a packing/unpacking operation, so no more having to redeploy after the game packs and unpacks the vessel.

Download (15.44 MiB)

Version 2.0.3 for Kerbal Space Program 1.8.0

Released on 2019-10-20

Changes 2.0.3

Hotfix * Re-exported the following parts to add a basic flat normal as KSP apparently no longer gracefully ignores no normal map for "Bumped..." shaders. * EUS * EUSDecoupler * ICPS * DCSS5m * DCSS5mDecoupler * DCSS4m * DCSS4mDecoupler * AresI * AresIIU * AresIDecoupler * Pyrios * PyriosNoseCone Everything should be back to looking normal.

Download (15.45 MiB)

Version 2.0.2 for Kerbal Space Program 1.8.0

Released on 2019-10-19

KSP 1.8.0 Compatibility: * DDS texture encoding changed to DXT5 from DXT3, textures should show up again!

Removed: * SLS Engine Mount - texture was removed, and isn't really necessary any longer. * Extra TGA textures that got left in the SRBs folder.

Download (15.38 MiB)

Version 2.0.1 for Kerbal Space Program 1.7.3

Released on 2019-08-08

Changes 2.0.1 (hotfix)

  • Changed the tech required for the Altair Landing Leg so that they will appear in the career tech tree (Thanks to NapalmPK for catching this.)

Download (18.40 MiB)

Version 2.0 for Kerbal Space Program 1.7.3

Released on 2019-08-05

Changes 2.0:


* External Tank Nose Cone
* External Tank
* External Tank End Cap
    * These three were replaced with two tanks (see Additions)
* File:  "_ShadowWorks_RealChutes.cfg" Removed
* File:  "_ShadowWorks_FSTextureSwitching.cfg" Removed
* SLS 5m - 3.25 m Adapter (Orion can be attached to the EUS using the SLS 5m Fairing Base No Payload variant.


* MOARdV Avionics Systems compatibility patches adding functioning MFDs and other controls to the Orion and Altair IVAs.  Also adds a camera and docking radar to the NASA Docking System (NDS) 0.9375m docking port.
* ModulePartVariant:
    * SLS Core Stage
        * Bare Orange Insulation
        * Black and White Painted
    * ICPS Decoupler
        * Bare Orange Insulation
        * Black and White Painted
    * EUS
        * Bare Orange Insulation
        * Black and White Painted
    * EUS Decoupler
        * Bare Orange Insulation
        * Black and White Painted
    * External Tank Liquid Fuel Tank
        * Bare Orange Insulation
        * STS-1 White
        * Jupiter (DIRECT) Liquid Fuel Tank with Engine Mount (Mesh)
    * External Tank Oxidizer Tank
        * Bare Orange Insulation
        * STS-1 White
        * Jupiter (DIRECT) Oxidizer Tank (Mesh)
    * Shuttle Orbiter Radial Decoupler
        * Bare Orange Insulation
        * STS-1 White
    * Orion Pod
        * Mirrored
        * White
        * EFT-1 Black
    * Orion CM Cap
        * Mirrored
        * White
        * EFT-1 Black
    * ICPS
        * ICPS (Mesh)
        * DCSS 5m (Mesh)
    * SLS 5m Fairing Base
        * Orion attach nodes to accommodate the Altair Lander
        * Orion attach nodes for no/small payloads
        * Orion attach nodes for tall payloads
* Jupiter (DIRECT) Upper Stage Tank
* Earth Departure Stage Tank
* Jupiter Upper Stage Engine Mount (6x symmetry)
* Earth Departure Stage Engine Mount (1 engine & 2 engine variants, uses ModulePartVariant)
* Earth Departure/Jupiter Upper Stage interstage decoupler
* Altair Ascent Stage (w/integrated RCS and ascent engine)
* Altair Decoupler (w/airlock for crew EVA)
* Altair Descent Stage (w/integrated engines)
* Altair RCS Quad (rcs quads for the descent stage)
* Altair Landing Legs (must set to "Gears" Action Group to use the "g" hotkey)
* SRB Aft Separation Motor (mounts on aft skirt of 4-segment, 5-segment, and Black Paladin SRBs
* 4m Delta Cryogenic Second Stage
* 5m Delta Cryogenic Second Stage (ICPS without the Orion adaptor)
* Delta IV Medium decoupler
* RL10A
* Shuttle Orbiter radial decoupler
* 4-segment/5-segment SRB radial decoupler
* External Tank Oxidizer tank
* External Tank Liquid Fuel tank
* Ares I Payload Fairing Base

Updates: (Nearly Complete Overhaul)

* Orion Launch Abort System was separated into two (2) separate parts, the Abort Motor, and the Jettison Motor.
* Orion Pod:  Remodeled to add detail.
* Orion CM Cap:  Remodeled to add detail.
* Orion Heatshield:  Updated model, given mirrored finish
* Orion Chutes:  Made into single chute part that is attached to the Orion Pod directly.
* Orion CM Decopuler:  Remodeled.
* Orion Service Module:  Remodeled to add detail.  All RCS pods have been integrated with the SM, and attach nodes added for easier attachment of solar panels.
* Orion Solar Panels:  Added attach node for easier attachment to SM
* Orion SM Decoupler:  Remodeled to add detail.
* Orion SM Fairing:  Remodeled to add detail and improve staging of the petals.
* ICPS:  Remodeled, 5m DCSS is a variant of this part, added flag decals
* ICPS Decoupler: Remodeled to add detail.
* SLS Core Stage:  Remodeled to add detail.  Integrated the SLS Engine Mount.
* Exploration Upper Stage:  Remodeled to add detail.
* Exploration Upper Stage Decoupler:  Remodeled to add detail.
* 4-Segment, 5-Segment, and Dark Knight SRBs:  Remodeled to add detail.
* SRB Nose Cone:  Remodeled to add detail.
* Pyrios Nose Cone:  Remodeled to add detail.
* Delta IV CBC:  Remodeled to add detail.
* RS-68:  Remodeled to add detail.
* GEM-60:  Remodeled to add detail, and a gimbal-able nozzle.
* RS-25:  Remodeled to add detail.
* RL10B:  Remodeled to add detail, and add an extendable nozzle.
* RL10C:  Remodeled to add detail.
* F-1B:  Remodeled to add detail.
* J-2X:  Remodeled to add detail.
* Pyrios booster:  Remodeled to add detail.
* Ares I Upper Stage:  Remodeled to add detail.
* Ares I Adapter:  Remodeled to add detail, added integrated separation motors.
* 2.5m and 3.75m to Orion Adapters:  Remodeled to add detail.
* SLS Fairing Base:  Remodeled to add detail.  Added integrated decouplers, 1 for attaching payloads that is not activated by staging, and another for the Orion that is activated by staging the fairing.  Added attach nodes for the Orion SM Fairing.
* Delta IV Payload Fairing:  Remodeled to add detail.  Added a payload fairing for the 4m DCSS.

Download (18.39 MiB)

Version 1.3.3 for Kerbal Space Program 1.4.3

Released on 2018-06-01

Changes 1.3.3: ——————— * Corrected incorrect RCS effect rendering on all parts with RCS thrusters. * Lowered bottom attach node on OrionCMHeatShield just enough to correct an issue with OrionCMDecoupler collider becoming entangled with the LAS collider preventing abort and LAS jettison * Re-saved all craft to make sure that all load in 1.4+ and that all those that use the Orion use the new bottom node of the Heat Shield. * Added FSTextureSwitch compatibility to allow switching of SLS tanks between the orange insulation and the white/black schemes.

Download (9.92 MiB)

Version 1.3.2 for Kerbal Space Program 1.3.0

Released on 2016-02-21

Changes 1.3.2:


  • Corrected an issue with _ShadowWorks_RealChutes.cfg that could cause problems if RealChutes is not installed.

  • Fixed the Odyssey Airlock to actually add crew capacity so that it can be used as an airlock

  • Changed all Space Station modules to remove the MODEL{} node to help prevent the scaling bug from cropping up.

Download (10.20 MiB)

Stats for ShadowWorks Stockalike SLS and More

Downloads over time

Downloads per version

New followers per day

Top Referrers


Export Raw Stats

Export Downloads

Export Followers

Export Referrals

Raw stats are from the beginning of time until now. Each follower and download entry represents one hour of data. Uneventful hours are omitted.