Mini Moke Versatile. A parts pack to give you a truly customisable Kerbal sized Mini Moke. (not the legs obviously as then it would be almost flat :) ) It comes in a standard 4 seat size and a shorty version. The standard has a range of accessories, bars for front back and roll over, a roof rack and window frame that all come in a range of colours. A canopy, the rear seats are optional (remember to place any Kerbals in them that you want to show up, when in the SPH, as they don't auto fill.) and you can put an aluminium tray in instead to make it a ute or just leave it empty. There is also a registration plate you can put anywhere you like. It will show whatever flag you have set for the vehicle. The front seats do auto fill. The shorty has it's own roll bar. Both mokes come in a range of colours (including original Kerbal). Their are 5 wheel choices. Evertything but the rego plate have their own nodes to snap into. The tray and it's nodes are orientated front to back so they don't get hung up on the other nodes. The snorkel out of my Kerbin Rover Redux mod goes well on the front fenders. So a car, rover, taxi, Mun buggy or even a shuttle to move Kerbals around a space station. It is up to your imagination what you would like to do. I have included a copy of the "Rocket Sounds Enhancement" plugin, but without it's sound library so that it only needs the GPL 3 license. I have a sound effect of my own in my mod so that if you have "Rocket Sounds Enhancement" installed the wheels make a humming noise that changes pitch with speed. (I personally don't like silent rovers.). Now with 3 new types of vehicles. A left hand drive Jeep for the other side of the runway. A Jeep Forward Control like, utility truck with 3 different trays including a car carrier. A trailer chassis so the trays can be used as trailers as well. A small trailer for the small vehicles. A hinge hitch so that you can have your trailers articulate when you go over humps. (Requires Breaking Ground to work.) A Fun Buggy with a built in impeller that floats so you can use it as a Personal Water Craft. I was too lazy to restrict the impellar to water, so if you have a full load of Kerbals and are using the impeller while on land, you can hit P to pop open their parachutes and go Paragliding. Just remember to repack the chutes when you land. Many accessories for the new vehicles including a winch. Requires Kerbal Attachment System to work.All vehicles have a front node for it but as it also surface attaches you need to Alt snap to node. New spot lights and a light bar that use the new KSP system, so you can change colour and make them blink. A portal hub so that the small vehicles can use the larger wheels. New wheels for the Jeep and Truck. Jerry Can and holder. A storage box. etc. Enjoy. Demo vehicles in the SPH folder. AS WITH ALL WHEELS, THEY NEED TO BE ROTATED 90 DEGREES CLOCKWISE ONCE PLACED ON THE VEHICLE TO BE THE RIGHT WAY UP. THE VALVE MARK SHOULD BE AT THE TOP. wheels, as a few users seem to have trouble understanding how they work.When first loaded into the SPH, the outside face is pointed towards the left of the hangar when looking out the open doors. It attaches on it's inner face. When you attach to a vehicle while looking at it's outer face you will see a mark at the 9 o'clock position that is made to look like a valve stem. You must rotate the wheel,while attached, 90 degrees clockwise, so that the valve mark is now at the top, also referred to as the 12 o'clock position, for it to work when out in the world. For those that don't have the mark just do the same action E.g the wheel with MOKE written on it should have the MOKE the right way up. If your wheels spin uselessly when in world, then you have not done this.