DaMichel's Fuselage (DMF) CKAN

An aero parts mod adding adding seven (7) stock-alike flat fuselage parts.
Download (605.39 KiB)

License: CC BY-NC-SA 3.0

Game Version: 1.8.1

Source code: https://github.com/zer0Kerbal/DaMichel/tree/master/GameData/DaMichel/Fuselage

Downloads: 12,527

Author: zer0Kerbal

Mod Website: Forum Thread

Support this mod: Donate

Followers: 20

Outdated Mod

This mod is not known to work with the latest version of Kerbal Space Program. Proceed with caution.

Information Changelog Stats

DaMichel's Fuselage

A continuation of DaMichel's Fuselage Pack

originally named Flat Fuselage
Fuselage version KSP version CKAN listed License CC BY-NC-SA 3.0

An aero parts mod adding adding seven (7) stock-alike flat fuselage parts.

Author

Adopted for curation by zer0Kerbal. Originally created by DaMichel.

Fuselage: These parts are rectangular fuselage pieces meant to be radially attached. You get two center pieces, an air inlet, a terminal piece, an adapter to the standard 1.25 m parts and as extras a smallish tail boom and a slanted cone. Patch for B9 fuel switch included. The remaining patches are /YMMV/.

Contains three stack stock-a-like parts:

  1. tank
  2. tank - long
  3. air inlet
  4. terminal piece
  5. flat to 1.25m adapter
  6. radially attached tail boom
  7. slanted cone

Screenshots
DaMichel's Fuselage

View full album

  • RealFuels compatibiliy: configs are included.

  • AJE compatiblity: The inlet has a configuration for AJE. I copied the config for the Sp+ rectangular inlet and made the inlet area larger. Not sure what i'm doing though.

  • Swappable Tanks: If you have the Firespitter DLL and no RealFuels it will use it to give the parts swappable tanks. So you can chose between LF, LF+OX and MP variants.

  • Usage of FerramAerospaceResearch is strongly recommended. The parts have some values for stock aerodynamic parameters but i have no idea if they are reasonable nor will i take the time to balance for stock. In contrast, FAR figures this stuff out automagically.

  • ActiveTextureManager: I include a configuration which scaling in general and compression of the normal map. If you li

Installation Directions

  • Use CKAN

Changelog Summary

See ChangeLog for full details of mod changes

Requires

Depends

  • none

Recomends

Suggests

Supports

Tags

  • mod,DaMichel,zer0Kerbal,parts,generator,cargo,bay,

Replaces

Conflicts

License

Source: GitHub

License: CC BY-NC-SA 3.0CC BY-NC-SA 3.0 CC BY-NC-SA 3.0

Attribution-NonCommercial-ShareAlike (CC BY-NC-SA) - All bundled mods are distributed under their own licenses
- All art assets (textures, models, animations) are distributed under their own licenses

Permission granted by original author: DaMichel's Permission

Source: https://forum.kerbalspaceprogram.com/index.php?/topic/55842-**)
License: Content originally created by DaMichel Licensed under CC-BY-SA-3.0 (Attribution, Share Alike)
Original: Thread:
Source/License: Source and license are included in the zip.)

v1.1.0.0 original: 11 Aug 2018 zed'K | updated: 17 Feb 2020 zed'K

https://creativecommons.org/licenses/by-sa/3.0/

Version 1.1.0.2 for Kerbal Space Program 1.8.1

Released on 2020-03-09

Fuselage version KSP version CKAN listed License CC BY-NC-SA 3.0

Version 1.1.0.2 -Superglue and Dusting

  • cleaned part.cfg's of extraneous // comments
  • added side nodes in a B9partswitch patch
  • updated changelog to use updated KERBALCHANGELOG formatting.
  • updated B9PartSwitch patches to use localization

Kerbal Space Program 1.8.1
#3

Download (605.39 KiB)

Version 1.1.0.1 for Kerbal Space Program 1.8.1

Released on 2020-02-23

Fuselage version KSP version CKAN listed License CC BY-NC-SA 3.0

Version 1.1.0.1 - Spit'n'Polish

  • thank you to KottabosGames for the review and suggestions!
  • thank you to BenjaminCronin for pointed out decorative right brace in changelogs. wite-out applied.
  • Also dangling VERSION. superglued applied.
  • adjusted strength and temperatures of all parts.
  • added explosionPotential = 0.5
  • added missing buoyancy = 0.1
  • [DM-fuselage-intake.cfg] has the same specs like the Ram Air Intake.
  • added missing thermalMassModifier = 12.0
  • added missing machcurve to ModuleResourceIntake on intake
  • adjusted intakeSpeed from 10 to 15
  • adjusted RESOURCE IntakeAir amount/maxAmount from 0.2 to 2.0
  • adjusted cost/entryCost from 2000/1600 to 2680/14000
  • adjusted maximum_drag from 0.2 to 0.3
  • adjusted minimum_drag from 0.2 to 0.3
  • added missing ModuleAnimateHeat
  • added missing stackSymmetry = 2
  • [DM-fuselage-cone]
  • basing stats on: Advanced Nose Cone - Type B (pointyNoseConeB)
  • adjusted scale = 0.9375, 0.9375, 0.9375 from 1.0, 0.9375, 1.0 noted by Kottabo
  • adjusted entryCost to 8000 from 1600
  • corrected typo on maximum_drag should have been 0.1 instead it was 0.11
  • adjusted angularDrag to 0.25 from 0.5
  • adjusted maxTemp to 2000 from 2900
  • added: size2 to bulkheadProfiles = mk1, size2, srf
  • added: explosionPotential = 0.5
  • added: CoMOffset = 0.0, 0.0, -0.313
  • added: CoPOffset = 0.0, 0.0, -0.313
  • added: CoLOffset = 0.0, 0.0, -0.313
  • added: CenterOfDisplacement = 0.0, -0.2, 0.0
  • added: thermalMassModifier = 6.0
  • added: emissiveConstant = 0.95
  • added: buoyancy = 0.1
  • added ModuleAnimateHeat
  • [DM-fuselage-tailboom]
  • Based upon Tail Connector A (airplaneTailB)
  • adjusted entryCost to 2500 from 1600
  • adjusted cost to 500 from 200
  • adjusted crashTolerance to 8 from 20
  • adjusted maxTemp to 2200 from 2900
  • added: thermalMassModifier = 6.0
  • added: emissiveConstant = 0.95
  • added: explosionPotential = 0.5
  • added: CoMOffset = 0.0, -1.5, 0.0
  • added: CoPOffset = 0.0, -1.5, 0.0
  • added: CoLOffset = 0.0, -1.5, 0.0
  • added: CenterOfDisplacement = 0.0, -1.5, 0.0
  • added: buoyancy = 0.1
  • added: explosionPotential = 0.5
  • added: ModuleAnimateHeat
  • [DM-fuselage-X1] DMF - Flat Fuel Tank X1
  • based upon Mk2 Rocket Fuel Fuselage Short(mk2FuselageShortLFO)
  • adjusted: entryCost to 15000 from 1600
  • adjusted: crashTolerance to 50 from 10
  • adjusted: maxTemp to 2500 from 2900
  • added: buoyancy = 0.1
  • added: srf to bulkheadProfiles = mk1, srf
  • added: mirrorRefAxis = 0, 0, -1
  • added: ModuleLiftingSurface
  • [DM-fuselage-X2] DMF - Flat Fuel Tank X2
  • based upon Mk2 Rocket Fuel Fuselage(mk2FuselageLongLFO)
  • adjusted: entryCost to 18000 from 1600
  • adjusted: crashTolerance to 50 from 10
  • adjusted: maxTemp to 2500 from 2900
  • added: buoyancy = 0.1
  • added: srf to bulkheadProfiles = mk1, srf
  • added: mirrorRefAxis = 0, 0, -1
  • added: ModuleLiftingSurface
  • [DM-fuselage-front] DMF - Flat End
  • based upon (noseConeAdapter) NCS Adapter
  • adjusted: entryCost to 8000 from 600
  • adjusted: mass to 0.1 from 0.11
  • adjusted: angularDrag from 0.25 // 0.5
  • adjusted: maxTemp to 2400 from 2900
  • added: explosionPotential = 0.5
  • added: CenterOfDisplacement = 0.0, -0.2, 0.0
  • added: thermalMassModifier = 6.0
  • added: emissiveConstant = 0.95
  • added: buoyancy = 0.1
  • added: bulkheadProfiles = mk1, size0
  • added: ModuleAnimateHeat
  • [DM-fuselage-adapter] DMF - Flat to 1.25m Round Adapter
  • based upon (mk2SpacePlaneAdapter) Mk2 to 1.25m Adapter
  • adjusted: entryCost to 14000 from 1600
  • adjusted: minimum_drag to 0.1 from 0.3
  • adjusted: angularDrag to 2 from 1
  • adjusted: crashTolerance to 50 from 10
  • adjusted: breakingForce to 50 from 200
  • adjusted: breakingTorque to 50 from 200
  • adjusted: maxTemp to 2500 from 2900
  • added: srf to bulkheadProfiles = mk1, size1, srf
  • added: buoyancy = 0.1
  • added: emissiveConstant = 0.8
  • added: explosionPotential = 0.5
  • added: ModuleLiftingSurface
  • adjusted breakingForce on all parts from 50 to 200 (except where noted)
  • adjusted breakingTorque on all parts from 50 to 200(except where noted)
  • adjusted B9fuelswitch to have LF come after Structural instead of LFO

Kerbal Space Program 1.8.1

Download (611.75 KiB)

Version 1.1.0.0 for Kerbal Space Program 1.8.1

Released on 2020-02-17

Fuselage version KSP version CKAN listed License CC BY-NC-SA 3.0

Version 1.1.0.0 - Fresh Coat of Paint: Fuselage

  • adopted for curation by zer0Kerbal
  • for Kerbal Space Program (KSP) 1.9 (might work for earlier)
  • converted to use Localization - translations welcomed through GitHub Push Request
  • updated license to CC BY-NC-SA 3.0
  • file structure and modernization
  • added Kerbal Changelog
  • added Readme
  • created github repo
  • created SpaceDock entry
  • created CKAN entry
  • created Curseforge entry
  • created Forum post
  • created .json
  • modernized part.cfg
  • added DM-RFC (Radial Fuel Cell) - which is an air breathing, liquid fuel powered generator producing 1.5 EC/s
  • added ODFC patch
  • created DM-RFC texture
  • many little changes to patches/parts.

Kerbal Space Program 1.8.1

Download (779.76 KiB)

Stats for DaMichel's Fuselage (DMF)

Downloads over time

    Downloads per version

    New followers per day

    Top Referrers

    1. spacedock.info
    2. forum.kerbalspaceprogram.com
    3. www.curseforge.com
    4. www.google.com
    5. kerbalx.com
    6. github.com
    7. yandex.ru
    8. sd1a.52k.de
    9. duckduckgo.com
    10. spacedock.info

    Export Raw Stats

    Export Downloads

    Export Followers

    Export Referrals

    Raw stats are from the beginning of time until now. Each follower and download entry represents one hour of data. Uneventful hours are omitted.