AlphaMensae's Modular Launch Pads CKAN

Beyond launch clamps: Mix-and-match components to build all kinds of launch infrastructure

License: CC-BY-NC-SA

Game Version: 1.11.2

Downloads: 86,344

Author: AlphaMensae

Mod Website: Forum Thread

Followers: 144

Information Changelog Stats

AlphaMensae's Modular Launch Pads v2.1

Tired of wimpy launch clamps? Feel your KSP launch experience is lacking something? Well, then make any rocket launch an event by making a complete launch facility with launch base, towers and other accessories.  Board your crew,  start the countdown, then go for ignition sequence start!

Modular Launch Pads is a collection of parts, including various launch clamp-type bases, towers, crew elevators, hold-downs and other accessories. You start by either attaching a base to a bottom center node on a rocket; this can be either the bottom node of an engine, or an attach node added by one of the included path files that add an extra node to various mod rocket tanks, stages or engine mounts. Towers attach to the four nodes on the sides of the base. Swing arms and drop umbilicals attach to nodes on the towers; other parts can be attached to the tower tops. Holdd-downs are surface-attached to the deck, frame top or support pad on the base.

IMPORTANT: Use of the offset gizmo is required to customize the layout of the bases and towers. It is also necessary to hold left-shift wheb dragging the gizmo's arrow handles to get 20m of offset range, otherwise you won't be able to move a part very far.


INSTALLATION INSTRUCTIONS

Modular Launch Pads v2.1 is only for KSP versions 1.8.1 and higher, older KSP versions are no longer supported.

Delete any existing Modular Launch Pads folder. Always do this when updating, as file names can change, and simply copying a new version over the older one can cause problems.

In the download .zip file, there is a GameData folder. Copy the ModularLaunchPads folder from there into your KSP GameData folder. DO NOT put the GameData folder from the .zip into your KSP GameData folder, there can be only one GameData.

If you already have the latest versions of the dependencies, then you do not need to copy them over. Otherwise copy over the ones you need from the .zip into your KSP GameData folder.

B9PartSwitch is required, and must be present in your KSP GameData.

CommunityCategoryKit is required, as the parts are hidden from the stock categories by default, and the custom CCK category is needed to find them. The included stock custom category (located in the Advanced mode of the part picker) can also be used, and includes subcategories.

Animated Decouplers is optional, but strongly recommended as it allows the the animations for the various hold-downs, umbilicals, swing arms and fallback towers to be staged.

Animated Attachment is optional, but makes rotating the launch rails much easier. Warning: Animated Attachment adds itself to all animated parts, gimballing engines, control surfaces and launch clamps. I have a patch that removes it from all my parts except the launch rails and Saturn Hammerhead Crane, but other mod parts and the stock parts will still have it. I am not responsible for what Animated Attachment does to other parts, only my own.

Craft files go into your KSP/saves/xxxx/Ships/VAB.

The Extras Folder has the older freestanding versions of the Saturn and Shuttle Launch Bases. Copy the .cfg and .mu files into the ModularLaunchPads/Saturn_Shuttle folder to use them.


v2.0 Screenshots by Zorg and AlphaMensae


Launch Stands

General Launch Bases and Small Test Stand

Soyuz Launch Base

Shuttle Launch Platform

Saturn Mobile Launcher


Assembly Guide: Saturn V Mobile Launcher


Assembly Guide: Space Shuttle Launch Plarform

Version 2.1.6 for Kerbal Space Program 1.11.2

Released on 2021-04-19

  • Slowed down the General Crew Elevators, Saturn Tower elevators and Shuttle Tower elevators even more to help alleviate the Kerbals phasing through the floor of the elevator car that happens with the new anchoring system introduced into KSP.
  • Revised the Modify_Animated_Attachment.cfg to add the Animated Attachment module to the crew elevators to allow the use of command chairs in the elevator car.
  • Retitled the Extra Large General Modular Service Tower to the Titan III Modular Service Tower, and moved it to the Special Service Towers subcategory.
  • Added missing walkway collider to entrance of the Large General Crew Arm - Large Mount.

Download (40.86 MiB)

Version 2.1.5 for Kerbal Space Program 1.11.2

Released on 2021-04-14

  • All crew elevators have been greatly slowed down so they are now useable on fast computers. This now results in a "slow ride" to the access arm.
  • Removed the max height preset options from the Saturn and Shuttle crew elevators. Saturn elevators are now fixed at 80m max height, the Shuttle elevators at 45m amx height. Done so a single elevator speed could be implemented and to reduce needless complexity.
  • Soyuz Large Fuel Arm umbilicals can now be separately adjusted in horizontal length. *` Soyuz Large Fuel Arm lower umbilical can also be separately adjusted in vertical position.
  • Added red color option to all of the Shuttle FSS tower parts, arms and the RSS, for that quasi-Vandenberg look.
  • Removed base collider from the Flat Vert Bolt General Hold-Down, leaving just the center collider, to prevent collider clipping issues.
  • Added missing Energia Launch Plate .cfg file, so it now shows up in the part list. Ok, I somehow forgot to make one the first time.

Download (40.86 MiB)

Version 2.1.4 for Kerbal Space Program 1.11.2

Released on 2021-02-18

  • Reset the General Medium Modular Tower Section's rescaleFactor back to 1, after forgetting about having changed it for a B9PS test.

Download (40.62 MiB)

Version 2.1.3 for Kerbal Space Program 1.11.1

Released on 2021-02-16

  • Added 20m extensions to the foot pads of the General and Flat Launch Bases so they will reach the ground when rescaled to a size that extends past the lanch pad static.
  • Changed the tech tree nodes for some of the launch stands and umbilicals. All the historic launch stands and their accessories are now in the custom Launch Stands node. The General Round and Rectangle stands, the beam swing arms and all umbilicals are now in the start node.
  • Removed Animated Attachment from the download and GitHub as it can cause major problems with other parts if it is installed. It is not needed for Modular Launch Pads, was only offered as aan option for the Launch Rails, so if you still want it, you have to get it yourself.
  • The Hide_Parts patch now only runs if CommunityCategoryKit is intstalled.

Download (40.62 MiB)

Version 2.1.2 for Kerbal Space Program 1.11.1

Released on 2020-11-14

  • Greatly increased the evaDistance for all crew elevators so Kerbals on EVA can send the elevator car down as well as up.
  • Added another MLP Example Craft File, #5

Download (40.64 MiB)

Version 2.1.1 for Kerbal Space Program 1.10.1

Released on 2020-11-10

  • Added missing Launch Plates tech tree node for the Unkerballed Start tree.
  • Fixed typo in Mounting Platform description.

Download (40.64 MiB)

Version 2.1.0 for Kerbal Space Program 1.10.1

Released on 2020-11-01

NEW NEW NEW NEW NEW
  • All parts are now hidden from the stock Structural category. Use the custom CCK category tab or the stock custom category (which has subcategories) to find the parts. Delete the Hide_Parts.cfg in the Category folder if you want the parts back in the Structural tab.

  • The former multi-size merged parts have been split off into separate parts, but the older internal part name is still used for one the new parts. Existing v2.0 craft files will still load, but most likely won't look the same, and will need to be rebuilt.

  • NEW: Historical launch stands for the Bluedog Design Bureau Vanguard, Redstone/Jupiter/Juno, Thor/Delta, Atlas and Titan II rockets, but can be used with other rockets of the same diameters.

  • NEW: Historical service towers for the new historical launch stands. The Titan II tower comes in single-piece and modular section versions.
  • NEW: Jupiter-style Petal Cover for the Redstone Launch Stand.
  • NEW: Mercury-Atlas Crew Elevator, with separate Mercury-Atlas Crew Walkway. Walkway has switchable mounts for use with the smaller crew elevators.
  • NEW: Atlas Mini Modular Tower, which serves as the historical Atlas tower. Has switchable styles for Agena and Centaur upper stages.
  • NEW: Atlas-Agena and Atlas-Centaur retracting umbilical arms. The Centaur arms are also available as separate parts.
  • NEW: Launch Plates, ultra-low profile flat clamp bases for the minimalist style. Thress sizes of round and square types.
  • NEW: Falcon 9-style Launch Plate, and interim N1 and Energia Launch Plates.
  • NEW: Mini Milkstool Launch Stands. These are small launch-clamp versions of the Saturn Milkstool, with three sizes, each with two height variants.
  • NEW: Separate non-launch clamp versions of the Mini Milkstools, with built-in decouplers for use with Launch Plates and Launch Bases.
  • NEW: Launch Rails, add-on part for Launch Stands, Plates and Bases. Four sizes with built-in decoupler, can be rotated with Animated Attachment or B9PartSwitch.
  • NEW: Extra-Large General Service Tower, styled after the Titan III/IV fixed service tower.
  • NEW: Titan III/IV Mast, the angled structure which was located on the Titan III/IV Mobile Launcher.
  • NEW: Small General Crew Elevator, comprised of separate modular sections (base, multi-height core, top). Uses the Large General Arm, Small General Crew Arm or Mercury-Atlas Crew Walkway with appropriate mount types.
  • NEW: Mini General Crew Elevator, comprised of separate 2-height core and multi-height tower sections. Uses the Small General Crew Arm or Mercury-Atlas Crew Walkway with appropriate mount types.
  • NEW: Small General Crew Arm, with separate versions for the Small and Mini General Crew Elevators.
  • NEW: Droop-style general umbilicals. Four sizes of simple bent-style umbilical hoses for a bit more realism.
  • NEW: Two more sizes of the basic beam-style swing arms.
  • NEW: Mini size General Fallback Tower, sized for Electron/Falcon 1-style rockets.
  • NEW: Rodan Crew Access Arm, sized for the Tundra Exploration Rodan (SpaceX Crew Dragon) capsule, and used with the Shuttle FSS Tower.
  • NEW: General Mounting Platform, an alternate version of the Mini Flat Launch Base, with solid deck, toggleable railings and side attach nodes. Use for supporting ground structures.

    REVISED REVISED REVISED REVISED

  • REVISED: General Launch Stand has been split into separate Round and Rectangle versions, and both completely remade. Redstone-style service pole removed from Round version (now in the Redstone Launch Stand), but still available as a separate part.

  • REVISED: Flat and General Launch Bases have been split into separate sizes, with added detail and hole options, and new ladders. Ladders and railings have separate switchable colors.
  • REVISED: General Service Towers have been split into separate size versions, and each split into separate modular section parts: stackable core, multi-height section (except for the Extra-Large Tower) and top section with optional mast(s).
  • REVISED: The former General Crew Elevator and Crew Arm have been renamed the Large General Crew Elevator and Crew Arm. Elevator has been split into modular section parts, with two versions of the base. Large Crew Arm has separate Large and Small Elevator mount types, and more length variants.
  • REVISED: General Swing Arms have been split into separate size versions, and all completely remade.
  • REVISED: General Straight Umbilicals remade.
  • REVISED: Atlas V Service Mast and Delta II Service Tower, with additional details and/or changed styling. Separate modular section versions now available.
  • REVISED: Former Small Test Stand had been split into three separate versions: Cradle type, Tower Type and Engine Type.
  • REVISED: Flat Vertical Bolt General Hold-Down now has a tall bolt variant.

  • REVISED: Saturn and Shuttle Towers have been split into separate modular sections, consisting of the base, multi-heght core, 2-height crew access and top.

  • REVISED: Shuttle FSS tower sections have an alternate SpaceX-style black&white color scheme, and optional mesh side panels added.
  • REVISED: Shuttle RSS Hinge has been split off into a separate part, with the detail being toggleable, and black color option added. Now the current state of the FSS on LC-39A can be recreated without having to add the full RSS.
  • REVISED: Saturn Hammerhead Crane is now an animated part instead of free-rotating. The original-style lightning mast is included, also still available separately.
  • REVISED: The tall white cylinder alternate Saturn Lightning Mast is now the Shuttle Lightning Mast with different mount options.
  • REVISED: Saturn and Shuttle Launch Bases can now be properly rotated using B9PartSwitch--no more misaligned support legs!
  • REVISED: Mass values for the Saturn and Shuttle tower sections have been reduced to tiny amounts.
  • REVISED: The Freestanding versions of the Saturn and Shuttle Launch Bases (in the Extras folder of the download) now have switchable masses: 1 ton for transport, 2000 tons for on the launch pad.

  • REVISED: Soyuz Launch Base parts now have a third blue color option, based on the ESA Soyuz pad colors.

  • REVISED: Soyuz Large Fuel Arm, Small Fuel Arm and Gantry. More height options, straight-sided extension for the Small Arm and switchable-adjustable platform stack for the Gantry.

    GENERAL GENERAL GENERAL

  • Extensive use of B9PartSwitch transform move and rotate, node move and UI Group features for smaller part sizes and easier to understand Part Action Windows.

  • All launch clamp bases and stands can now have the staging disabled when a milkstool or launch rail or other part is attached to them.
  • Various part title and description changes; part cost is now 1 for everything.
  • Removed simple rescale patch from Extras. Realism Overhaul now directly supports Modular Launch Pads, ask the RO devs for additional support/help if needed, it is their responsibility.
  • Remade all craft files for v2.1. Subassemblies removed, there are now four Example MLP craft files (with a stock rocket for demo purposes), along with bare versions of the Saturn and Shuttle launchers.

Download (40.64 MiB)

Version 2.0.8 for Kerbal Space Program 1.10.1

Released on 2020-02-15

  • Removed the integrated clamp arms, fuel arms and gantry from the Soyuz Launch Base. Attach them separately now; clamp arms surface attach, the fuel arms attach to the auxiliary nodes on the ring, and the gantry attaches to the auxiliary node in the center, below the rocket attach node.

  • Added transfer airlocks to the gantry's crew elevator platforms, to allow crew boarding of a spacecraft inside a fairing via the crew transfer function.

  • Updated B9PartSwitch to v2.13.0 for KSP 1.8.1, works in KSP 1.9.x. It is now the default B9PS in the download's GameData Folder.

  • B9PartSwitch for KSP 1.7.3 is available as a separate .zip file in the root folder of the download.

  • Updated Spacedock compatibility to KSP v1.9.

Download (37.22 MiB)

Version 2.0.7b for Kerbal Space Program 1.8.1

Released on 2019-12-24

  • Moved the KSP 1.7.3 version of B9PartSwitch .zip out of the download's GameData folder and into the top level; that was an error.
  • The version of B9PartSwitch in the download's GameData Folder is for KSP 1.8.1 and is no longer a .zip file, it can be copied into your KSP's GameData folder as-is.

Download (40.22 MiB)

Version 2.0.7 for Kerbal Space Program 1.8.1

Released on 2019-12-24

  • Modifed the sound effect of the General ROFI and Shuttle Tail Service Mast sparker by a large amount to make it much quieter.
  • Changed .cfg and .mu names for the General Hold Downs and General ROFI
  • Updated the stock custom category and custom tech tree node .cfgs to those of v2.1
  • Now includes separate versions of B9PartSwitch for KSP 1.8.1 and KSP 1.7.3. Folders are named for which KSP version they are for.

Download (40.22 MiB)

Version 2.0.6 for Kerbal Space Program 1.8.1

Released on 2019-11-29

  • Added a drag cube definition (the one from the stock Mk1 Fuselage) to the parts with a deploy-limit adjustable animation to prevent the "Generating procedural drag cube" message spam in the console. Moving the deploy limit slider changes the shape of the part, and without a predefined drag cube, KSP will make, then remake again and again, a new procedural one.

Download (40.13 MiB)

Version 2.0.5 for Kerbal Space Program 1.8.1

Released on 2019-10-22

  • KSP 1.8: The current versions of B9PartSwitch, Animated Decouplers and Community Category Kit work in KSP 1.8 as is.
  • When a 1.8 version of B9PS is released, it will be included in all future updates of Modular Launch Pads.

  • Updated B9PartSwitch to v2.11.0; this one adds the ability to prevent B9PS modules from being moved to the end of the Part Action Window. It also fixes a bug with texture-switching on copied parts.

  • Added lines to parts with B9PS modules to prevent them from being moved to end of Part Action Window.

  • Removed alternate support columns from the Saturn and Shuttle clamp bases. They ended up outside the the base when the base was rotated.

  • Adjusted General ROFI and Shuttle TSM sparker's burn time to a maximum of 15 seconds with full fuel amount.

  • Renamed the alternate Saturn Lightning Mast to Shuttle Tower Lightning Mast.

  • Added a Module Manager patch to hide the Modular Launch Pads parts from the stock Structural tab into the Extras folder.

  • Added a basic Realism Overhaul compatibility patch into the Extras folder. I did not make this, I found it on the RO Discord server. It's just a simple rescale, TweakScale is not needed, and may not be complete or fully working.

  • Removed KSP 1.3.1 versions of the dependencies, as almost all RO players use KSP 1.6.1 now.

Download (40.12 MiB)

Version 2.0.4 for Kerbal Space Program 1.7.3

Released on 2019-08-17

  • Fixed missing FX for the General ROFI; forgot to update the paths to the FX for the v2 release.
  • Added some more BDB craft files and a subassembly for the Medium General Launch Base configured for a Delta-IV-Heavy-type rocket, with extra swing arms.

Download (40.83 MiB)

Version 2.0.3 for Kerbal Space Program 1.7.3

Released on 2019-08-14

  • Revised General Crew Arm to only have one retract animation, the direction is now changed by a B9PartSwitch changer. This fixes the arm appearing in the half-retracted position after loading or launching from the VAB.
  • Added more craft files for Bluedog Design Bureau, Tantares and Tundra Exploration, plus a stock craft with the Large Launch Stand.

Download (40.79 MiB)

Version 2.0.2 for Kerbal Space Program 1.7.3

Released on 2019-08-07

Removed alternate height variant from the Shuttle FSS Tower Base, as it was causing the whole shuttle platform to sit above the pad static in KSP 1.7.x

Download (40.47 MiB)

Version 2.0.1 for Kerbal Space Program 1.7.3

Released on 2019-08-06

2.0.1

Added separate patch for Bluedog Design Bureau Soilids.

Revised reDIRECT patch to add a node to the STS ET for SOCK.

Updated patches TantaresLV, Raidernick and Tundra Exploration.

Added craft files for SOCK shuttle and TantaresLV 1.875m TLV.

Added missing CCK tag to Small Service Tower Umbilical.

Download (40.52 MiB)

Version 2.0.0 for Kerbal Space Program 1.7.3

Released on 2019-07-31

  v2.0.0

  *  Complete remake and expansion of the old v1 Saturn and Soyuz base parts.
  All parts are completely new have new names.

  *  Addition of Shuttle Launch Platform and accessories.

  *  Addition of General Launch Bases and accessories.

  *  Addition of two Launch Stands (Small and Large) and early-career accessories, plus a Small Static Test Stand.

  *  Extensive use of mesh switching means fewer parts are loaded.

  *  All launch bases are now launch clamps, none are free-standing.
  Free-standing versions of the Saturn and Shuttle launch bases are available as separate extras, are not in GameData/ModularLaunchPads.

  *  All launch bases now have a fuel generator, outputting LFO, Mono and LH2 (with Community Resource Pack installed).

  *  Added Community Category Kit support, complete with a custom icon.

  *  Removal of old v1 Russian Launch Stand, it's clamp features have been integrated into the new Soyuz Launch Base.

Download (40.50 MiB)

Version 1.3.8 for Kerbal Space Program 1.7.2

Released on 2018-10-21

Removed "layer = 0" line from the Saturn pad parts that have both ModuleAnimateGeneric and ModuleAnimated Decoupler. This was making these parts reset after the animation finished when staged. The KSP 1.4.4 version of B9PartSwitch and the KSP 1.4.x version of Animated Decouplers work fine in KSP 1.5.x, so I haven't updated them.

Download (13.07 MiB)

Version 1.3.7 for Kerbal Space Program 1.5.1

Released on 2018-10-06

1.3.7 > Made the dummy nodes unusable for parts using Animated Decouplers by moving them to -1000 on the Y-axis. > Changed the order of the B9PS switchers for the Saturn tower arms so the color one is now last.

Download (13.07 MiB)

Version 1.3.6 for Kerbal Space Program 1.4.5

Released on 2018-09-19

Added a 6x60 hold-down support configuration to the square insert for the Saturn mobile launcher base.

Download (13.07 MiB)

Version 1.3.5 for Kerbal Space Program 1.4.5

Released on 2018-09-09

  • Created new custom tech tree nodes for the Saturn and Soyuz pads. They are located to the left of the start node and are all independent of each other.
  • Revised all Saturn pad parts that use Animated Decouplers by adding a size 0 attach node that is setup to decouple. Nothing can be attached to this node.
  • Made new subassemblies for the Saturn and Soyuz pads and the Russian Launch Stand.

Download (13.06 MiB)

Version 1.3.4 for Kerbal Space Program 1.4.5

Released on 2018-07-10

v1.3.4 Updated B9 Part Switch to v2.3.2 for KSP 1.4.4 Added craft file for the DECQ Saturn V on the full Saturn mobile launcher.
DECQ Saturn V forum thread: https://forum.kerbalspaceprogram.com/index.php?/topic/176505-12x13x14x-saturnv-v1022-d080718/&

Download (13.06 MiB)

Version 1.3.3 for Kerbal Space Program 1.4.4

Released on 2018-06-06

1.3.3 Revised elevator in the Saturn Tower bases, now the four height positions will arrive at the bottom at the same time, and will go up at the same time.

 The Saturn Milkstool can now be changed to the red color (Overlooked that I never updated the folder for the textures to the release one from the dev folder).

 The Russian Launch Stand can now actually output LF/O to fuel first stages or a single stage rocket.  Other fuel resources can be outputted with the separate fuel arms.
  The electric charge generator is now always active.

 The Soyuz Launch Pad Base can now actually output fuel resources when using the fuel arms from the Russian Launch Stand (fuel crossfeed had been left to 'False'' and never changed).
  The railings can now be switched off if desired (special request).

 Added the Russian Launch Stand's Crew Tower to the custom category (just an 'oops').

Download (13.05 MiB)

Version 1.3.2 for Kerbal Space Program 1.4.3

Released on 2018-05-22

Just a minor fix to another patch I made for the BDB Saturn I/IB engine mount, forgot something.

Download (13.05 MiB)

Version 1.3.1 for Kerbal Space Program 1.4.3

Released on 2018-05-20

1.3.1

Forgot to convert textures to DDS format...major derp moment

Fixed the two Saturn pad subassemblies to reference the correct part name, as I had reverted the two base sections back to their original name.

Download (13.00 MiB)

Version 1.3.0 for Kerbal Space Program 1.4.3

Released on 2018-05-20

1.3.0 Russian Launch Stand

> The Russian Launch Stand no longer uses a separate arm assembly. The clamp arms and one adjustable (by mesh-switching) fuel arm are now built into the stand itself. The fuel arm can be retracted manually. Two 
       additional fuel arms and a separate crew elevator tower can be added as well.

> Russian Launch Stand's clamp arms can also be turned off, so the big Soyuz Launch Pad's gravity-retract hinges and arms can be used instead.

> Color can now be switched to the Soyuz Pad's green.


**Soyuz Launch Pad**

> The Soyuz Launch Pad base now has switchable hinge-mount configurations, either at 90 or 45 degrees.

> The clamp arms have adjustable-size clamp pads, done by the deploy limit slider.

> Extra attach nodes are included on the base for use with the Russian Launch Stand's fuel arms and crew tower, as an interim step until I can make proper ones for the Soyuz Pad.

> The color for the base's central ring, clamp arms and counterweights can be switched to the gray-drab color of the Russian Stand.


**Saturn Pad**

> The individual tower swing arms have been eliminated. There are now new switchable Saturn tower swing arms, in four general sizes (for fuel tanks of 1.875m, 2.5m, 3.75m and 5m diameter), each with seven 
       switchable umbilical connector types.  There are also new BDB Saturn V arms with two different size options (for default and rescale sizes).  Eventually the general type arms will vary more from the Saturn V ones 
       they currently use as a base; this is a small step in that direction.

> The individual flame hole inserts for the base have been eliminated.  They have been replaced by a single square and rectangular switchable insert, both with multiple options.

> The standard launcher base no longer has attach nodes for accessories like SRB hold-down arms and tail service masts, these are now in the new switchable inserts.

> The tower base sections' elevators are now off by default, and have switchable maximum heights when turned on. The deploy limit slider can still be used to fine-adjust the stopping height.

> The hold-down arms no longer can be retracted manually, retraction is only by staging via Animated Decouplers

> What was the Type 1 and Type 2 hold down arms have been revised and renamed the Saturn V and Saturn IB Type B hold-down arm. The other hold-down arms have been renamed General Type [x].

> Two new hold arms have been added, a bottom-mount type and another one designed for the Saturn IB, the Type A.

> New Saturn Milkstool with an integrated insert, i.e. switchable node and hold-down supports.

> NOTE: Disable staging for any part (like swing arms) that is manually retracted, or move its staging icon into a stage above that of the launcher base, otherwise they will reset if staged.



**General**

> ALL OLD PARTS ARE NO LONGER LOADED BY DEFAULT.  They are in a separate folder called "Old_Parts" that is outside of the Gamedata folder in the .zip file. If they are needed to prevent craft and save files from 
       breaking, copy the "Parts" foder from "Old_Parts" into the ModularLaunchPads folder, and copy the contents of the "3D_Assets" folder from "Old_Parts" into the "3D_Assets" folder in ModularLaunchPads.

> Old parts won't appear in any category or the tech tree, they are provided solely to prevent craft and save files breaking so the old parts can be replaced. This is the last time old parts will be included.

> Saturn tower swing arms are now back in the Structural category.

> Added v2.3.0 of B9PartSwitch for KSP v1.4.3

> Added MM patch file for Tundra Exploration, it adds a size 5 node below the bottom of the three first stage tanks for attaching a launch pad.

> Revised the custom category, old parts were removed, new ones added.

Download (16.83 MiB)

Version 1.2.2 for Kerbal Space Program 1.4.3

Released on 2018-05-04

1.2.2 Added B9PartSwitch v2.3.0 for KSP 1.4.3

Added Module Manager patch file for FASA to the Patches folder.
This adds a size 5 attach node to several meters below the bottom of the first stage tank of the Saturn V, Saturn IB and Titan II, and the main tank for the Atlas and Redstone.  This node is used to attach the pad bases.

Download (8.52 MiB)

Version 1.2.1 for Kerbal Space Program 1.4.2

Released on 2018-04-07

Changelog

==================================================================================================

1.0 Initial release

1.0.1 Restored missing elevator animation from the angled tower base section Added notes file for using the modular tower with the Bluedog Design Bureau Saturn V and IB.

1.1 Added new Russian R-7-style launch stand clamp, an alternate version of the full free-standing Soyuz pad intended for early career mode. New launch stand requires Animated Decouplers, which is included in the .zip

1.2 B9 Part Switch texture switching added to the Saturn Tower parts which had red and gray versions; these now only have one part which can be switched between red and gray variants. Texture Switching only available with KSP 1.3.1 and 1.4.x versions of B9 Part Switch

All animated Saturn Pad parts (swing arms, hold down arms, tail service masts) can now be staged using Animated Decouplers as well as using the original animation movement.

*** All the original gray parts are now in a Deprecated folder, they will not appear in any category or tech tree node. At a future update, these parts will be removed.

The Crew access tower section now has an adjustable floor, done by the deploy limit in the right-click menu. The older alternate walkway part is now deprecated.

Custom category created for the Modular Launch Pads parts. The tower arms also will not appear in any stock category.

Some tweaks to the Saturn hold down arms and tail service mast parts and animations.

1.2.1 Revised the category for the Saturn Tower arms and all the deprecated parts, it's now set to -1 so they actually won't shup up in a stock tab now.

Download (8.48 MiB)

Version 1.2 for Kerbal Space Program 1.4.2

Released on 2018-04-07

Changelog

==================================================================================================

1.0 Initial release

1.01 Restored missing elevator animation from the angled tower base section Added notes file for using the modular tower with the Bluedog Design Bureau Saturn V and IB.

1.1 Added new Russian R-7-style launch stand clamp, an alternate version of the full free-standing Soyuz pad intended for early career mode. New launch stand requires Animated Decouplers, which is included in the .zip

1.2 B9 Part Switch texture switching added to the Saturn Tower parts which had red and gray versions; these now only have one part which can be switched between red and gray variants. Texture Switching only available with KSP 1.3.1 and 1.4.x versions of B9 Part Switch

All animated Saturn Pad parts (swing arms, hold down arms, tail service masts) can now be staged using Animated Decouplers as well as using the original animation movement.

*** All the original gray parts are now in a Deprecated folder, they will not appear in any category or tech tree node. At a future update, these parts will be removed.

The Crew access tower section now has an adjustable floor, done by the deploy limit in the right-click menu. The older alternate walkway part is now deprecated.

Custom category created for the Modular Launch Pads parts. The tower arms also will not appear in any stock category.

Some tweaks to the Saturn hold down arms and tail service mast parts and animations.

Download (8.48 MiB)

Version 1.1 for Kerbal Space Program 1.4.2

Released on 2018-04-04

Changelog

======================================================================================================================================================================

1.0 Initial release

1.01 Restored missing elevator animation from the angled tower base section

Added notes file for using the modular tower with the Bluedog Design Bureau Saturn V and IB.

1.1 Added new Russian R-7-style launch stand clamp, an alternate version of the full free-standing Soyuz pad intended for early career mode.

New launch stand requires Animated Decouplers, by Starwaster, which is included in the .zip

Added craft files and subassemblies for the free-standing Soyuz and Saturn pads.

Four Bluedog Design Bureau .craft files and one TantaresLV .craft file are included.

Download (7.81 MiB)

Version 1.01 for Kerbal Space Program 1.4.1

Released on 2018-03-26

1.01 Restored missing elevator animation from the angled tower base section Added notes file for using the modular tower with the Bluedog Design Bureau Saturn V and IB.

Download (6.83 MiB)

Version 1.0 for Kerbal Space Program 1.4.1

Released on 2018-03-25

Initial Release

Download (6.83 MiB)

Stats for AlphaMensae's Modular Launch Pads

Downloads over time

Downloads per version

New followers per day

Top Referrers

  1. spacedock.info
  2. forum.kerbalspaceprogram.com
  3. www.google.com
  4. www.bing.com
  5. www.youtube.com
  6. yandex.ru
  7. duckduckgo.com
  8. kerbalx.com
  9. www.spacedock.info
  10. www.google.co.uk

Export Raw Stats

Export Downloads

Export Followers

Export Referrals

Raw stats are from the beginning of time until now. Each follower and download entry represents one hour of data. Uneventful hours are omitted.