Zero-Point Inline Fairings
--------------------------

1.0.2 (2016-04-28) - Working toward stock aero support.
 - Moved "ModuelCargoBay" definitions out to 0P-AD.cfg (for "Animated Decouplers" dependency for stock aero).
 - Moved change log and readme into the mod folder.

1.0.1 (2015-06-09) - Fixes
 - Added transparency in VAB/SPH. Known issues: 
    - Flag decals look mangled in VAB/SPH, but look fine in flight.
    - Must mouse-over the base, not the fairing.
 - Updated Deadly Reentry config with more current data.
 - Updated the DRE config to not lower the heat resistence of the nose cones when DRE is not being used.
 - Added "ModuleCargoBay" modules to fairing bases, with hope of working toward stock aero support.

1.0 (2015-05-28) - Re-release after KSP 1.0.
 - Redesigned quite heavily. 
    - Requires FAR/NEAR or similar aerodynamics mod. WILL NOT SHIELD CONTENTS WITH STOCK AERO.
    - Fairing bases consolidated. 4 lengths per base.
    - Panels now separate in halves rather than quarters.
    - Updated tech tree assignments to correspond to new stock fairing diameters.
    - Added matching "flush" nose cones for sizes 1 & 2 (1.25m & 2.5m).
    - Added new bulkhead profile and thermal settings for KSP 1.0+.
    - Renamed nose cones to match more recent fairing naming scheme.
    - Various size and scaling adjustments.
    - Minor texture updates.
    - Updated textures to use DDS format.
 - Lite version of mod is discontinued.

0.9.2 (2015-05-07) - Retired, for now.
 - Updated version info to indicate that this is just for KSP 0.90.

0.9.1 (2014-12-22) - Minor tweaks
 - Added DRE support, by including a wildcard heatshield config for the nose-cones (full version only)

0.9 (2014-12-16) - Minor tweaks
 - Added manufacturer tag to item names to make all fairings name-sort together.
 - Fixed manufacturer icon in VAB/SPH manufacturer-sort.

0.8.1 (2014-11-17) - Beta Release - "Full version"-only sorting fix.
 - (Reminder: incompatible with v0.6 and earlier)
 - (Note: Remember to delete the old 0PinlineFairings folder before installing, otherwise you'll get duplicate parts in the menu)
 - Re-ordered the sorting of the fairing bases in the SPH/VAB (Full version only). Not game-breaking.

0.8 (2014-11-15) - Beta Release 
 - (Reminder: incompatible with v0.6 and earlier)
 - Added Size-1 (1.25m) flush fairings (Full version only).
 - Added Size-3 (3.75m) flush nose-cone (Full version only).
 - Fixed "model" assignments for the "Lite" pack's fairings, causing them not to load unless the "Full" pack was installed too.  

0.7 (2014-11-14) - Beta Release -- WARNING: Incompatible & Save-Breaking update from Previous Versions
 - Consolidated fairing bases to reduce part clutter. 
    - "Full" version reduced to 12 bases (from 18), with two lengths each (adding 6 new total sizes)
    - "Lite" version reduced to 3 bases (from 6), also with two lengths each (same sizes available).
    - Now, choose a base, then choose length by selecting a floating node to stack onto.
    - Note: Be careful not to attach other parts to the other floating nodes accidentally.
 - Added shorter versions of fairings (in "Full" version only)
 - Overhauled mass and cost of all fairings.
 - VAB/SPH icons now show just the fairing bases (not the fairing tube panels).

0.6 (2014-10-08) - Beta Release
 - Reduced purchase & research costs of all fairings by 90%. Somehow an extra zero was tacked on.
 - Fixed a typo in one of the configs, that had an entry cost set to "aero" (yeah, I don't know)

0.5 (2014-10-07) - Beta Release
 - Fixed scaling issues, to align with 0.25's rescaleFactor bug fix.

0.4 (2014-09-29) - Beta Release
 - Tweaked the scaling on the "flush" fairings to be a hair wider.
 - Fixed aspect ratio of flag-decal on the "flush" fairings.
 - Renamed:  Wide -> ExtraWide, and:  Regular -> Expanded
 - Forked "Inline Fairings Lite" as separate download with smaller parts list.
 - Tweaked the panel ejection slightly.

0.3 (2014-09-24) - Beta Release
 - Reduced mass of all parts
 - Changed TweakScale settings to allow "free" scaling of the 2.5m "Regular" and "Wide" fairings
	(to give them separate functionality from the otherwise identical 1.25m variants)

0.2 (2014-09-21) - Beta Release
 - Added AVC (Add-on Version Checker) support.
 - Fixed attachment point in the Size-2 Regular Nose Cone

0.1 (2014-09-20) - Initial Beta
 - First release. Only 2 days of work making the parts so far. :)
