Fixed J-34 "Chevron" High-Bypass Turbofan Engine having Jettison Module when not needed

Fixes on modulecargobay and bulkheadprofiles for payload parts*(Jognt)

*Mk1 Passenger Door

*Mk1 Nose Trunk CRG-NT

*Mk1 Junior Cargo Bay CRG-50-0

Fixed texture not found for various parts*

*K73 "Beluga" Turboshaft Engine

*Mk1 Cargo Bay CRG-50-1

*Size 2 Commercial Cockpit

*Size 2 Viewer's Cockpit II

*MK1 Inline Non-Commercial Cockpit

*MK1 Viewer's Cockpit II

*MK1 Caged Inline Cockpit

*MK1 Supersonic Cockpit

Corrected J-119 "Cheetah" Afterburning Turbofan bulkhead profile

Added tags on a few engines

*Last 3 variants will include Mk3 version of the first 3

Added J-56 "Lotus" High-Bypass Turbofan Engine variant removing the pylons

-

Fixed Size 1 100-KE Auxiliary Power Engine having wrong attachment points

Fixed Size 2 Non-Commercial Cockpit textures

Updated all Auxiliary Power Engine wrong Center of Mass

Updated J-34 "Chevron" High-Bypass Turbofan Engine wrong Center of Mass

Updated all hollow parts and hollow parts with animated doors' Drag Cubes for better Aero

Updated Firespitter to fix issue where choosing any other categorization except default will break the part catalog

Added Size 1 100-KE Auxiliary Power Engine based on Honeywell RE-100 and RE-220 APUs

Added Size 1.5 220-KE Auxiliary Power Engine based on Honeywell RE-220 APU

Added Size 2 131-9K Auxiliary Power Engine based on Honeywell 131-9A APU

-

Fixed issue where obsolete texture paths on landing gears cause NREs

Fixed issue where Kerbal Standard has a missing title

Fixed some landing gears having omitted aerodynamic changes when deployed/undeployed

-

Updated for 1.6.x

Added L K-235 "Cat" Turboprop Engine based on 152 and 182 Skylane

Added Mk3S1 Crew Cabin

Added Mk3S1 Nosecone

Added Mk3S1 Adjustable Ramp Intake, a based off the stock one

Added Mk3S0 Nosecone

-

Added Angled Wing Connector A*

Added Angled Wing Connector B*

Added Angled Wing Connector C*

Added Angled Wing Connector D*

*angled 5 degrees

-

Added experimental Mk3SX variant for*

J-119 "Cheetah" Afterburning Turbofan (Raptor Jet Engine)

-

Added Pontoon and Pontoon-Mk3S options for*

*Mk3S1 Liquid Fuel Fuselage

*Mk3S0 Liquid Fuel Fuselage

*Mk3S1 Liquid Fuel Fuselage Junior

*Mk3S0 Liquid Fuel Fuselage Junior

-

Resized FAT-T3R Aeroplane Main Wing (C-130 wing)

Resized RR K56 "Titan" Turboprop Engine (C-130 engine)

-

Adjusted various tech tree nodes, allowing earlier flight*

*Includes rotors and wing parts

-

Fixed KS-FAT-29 Huge Landing Gear with wrong turning animation

-

Modified some landing gear values (some still bouncy, mostly not my fault)

Added J-34 "Chevron" High-Bypass Turbofan Engine based on E-170's CF34 as well as CRJ-900

Added Size 1.5 Crew Cabin

Added Size 1.5 Air Ramp

Added Size 1.5 Structural Fuselage

Added Size 1.5 Structural Fuselage Junior

Added Small Nose Cone B

Added Size 1.5 Tail Connector A

Added Size 1.5 Tail Connector B

Added Size 1.5 Tail Connector A Short

Added Size 1.5 Tail Connector B Short

-

Fixed 1.875m Liquid Fuel Fuselage having no colliders

Fixed Mk3S1.5 Structural Fuselage collider preventing entry inside the hull

Fixed Mk1 Inline Stabilizer weight being too heavy

-

Changed some tech tree distributions

Added L K53 "Valkyrie" Turboshaft Engine based on the UH-1 Iroquois/Huey as well as its tail rotor, L K53-S Control Rotor

Added sound patch for all stock jet engines (Can be deleted on AirplanePlus/Sounds/Patch)

-

Added Mk3S0 Liquid Fuel Fuselage

Added Mk3S0 Tail Connector A

Added Mk3S0 Tail Connector B

Added Mk3S0 Liquid Fuel Fuselage Junior

Added Mk3S0 to 0.625m Adapter

-

Added Mk3S1 Liquid Fuel Fuselage

Added Mk3S1 Tail Connector A

Added Mk3S1 Tail Connector B

Added Mk3S1 Liquid Fuel Fuselage Junior

Added Mk3S1 to 1.25m Adapter

-

Added Mk3S1.5 Liquid Fuel Fuselage

Added Mk3S1.5 Cargo Bay

Added Mk3S1.5 Structural Fuselage

Added Mk3S1.5 Liquid Fuel Fuselage Junior

Added Mk3S1.5-Mk3S1 Liquid Fuel Fuselage

Added Mk3S1.5 to 1.875m Adapter

-

Added 1.875m Liquid Fuel Fuselage

Added 1.875m Liquid Fuel Fuselage Junior

-

Changed name of KV2-117A Control Rotor to KV2-117A-S Control Rotor

Changed some of the hollow parts' drag cubes thanks to neistridlar

Fixed cockpits spawning as "Ships" instead of "Planes"

Fixed Mk1 Nose Trunk CRG-NT having convex collider problems making it spawn high

Power of prop engines have been increased/decreased accordingly

Reduced bouncing for diagonal and small gears, deploying and fixed alike

Balanced the amount of weight Release 20 landing gears can handle

Redesigned Mk1 Non-Commercial Cockpit

Minor Redesign for Mk1/Mk2 Caged, Viewer's, and Non-Commercial Cockpit IVAs

-

Added Seat_Eject IVA prop based on various ejection seats

Added Seat_Fighter IVA prop based on P-51 mustang cockpit seat

Added Seat_Leather IVA prop based on various helicopter seats

Added Seat_Control IVA prop based on a firespitter prop for pre-modern planes but stockalike features yaw, pitch and yaw control animation

Added Seat_Pedal IVA prop based on the stock pedal, features yaw control animation

Added controlstick IVA prop based on stock control stick features pitch and roll animation

Added helistick IVA prop based on stock control stick and helicopter sticks, features pitch and roll animation

Added KS-FAT-29 Huge Landing Gear based on the B-29 Superfortress Rear Landing Gear

Added KS-51 Landing Gear based on the P-51 Mustang Wing Landing Gear

Added KS-16 Slant Landing Gear based on the F-16 Fighting Falcon Rear Landing Gear

Added KS-X1 Steerable Landing Gear based on the Bell X-1 Front Landing Gear

Added KS-X1 Assymetric Landing Gear based on the Bell X-1 Rear Landing Gear

-

Fixed Size 2 Cargo Bay CRG-15 having aerodynamics, animation and clamping relations (Usgiyi)

Fixed intake texture of the K76 "Predator" Turboprop Engine (Citizen247)

Fixed Short Tail Connector Size 2A having no collider (Citizen247)

Closed the collider of the 9J "Baron" Rotary Engine for FAR users

Added MK1 Supersonic Cockpit based on Bell X-1

Added K-3350 "Tempest" Radial Engine based on the Duplex-Cyclone of B-29

Added Tail Connector Size 2A and 2B, upsized Tail Connectors which connect to Size 2

Added Short Tail Connector Size 2A and 2B, also connecting textures with Size 2

-

Increased deployment speed of S.P.O.I.L.E.R to closely match real deployment speed

-

Fixed Mk2/Object 1.44 Non-Commercial Cockpit having no hatch

Fixed Mk2/Object 1.44 Non-Commercial Cockpit reorienting on revert to launch

Added KS-130 Low Landing Gear based on C-130 Front Landing Gear

Added KS-130-S2 Low Landing Gear based on C-130 Rear Landing Gear

Added KS-29 Tall Landing Gear based on MiG-29 Front Landing Gear

-

Added nodes to some Mk2/H parts making it possible to make Mk2 with two Mk2/H

Added cockpit light to Mk3 Cargo Cockpit

-

Fixed issue where Delta-Advanced Winglet control surfaces moved in reverse visually

Further improvements in sound for some helicopter rotors

Synchronized rotary engine spin with propellers when shutting down 9J "Baron" Rotary Engine

Added Basic Curve Winglet based on P-40 Warhawk Tailfin

Added Structural Fuselage Offset for Mk1 Bulkhead, can be used to slant body in 5 degree increments.

--

Adjusted all sounds from "defeaningly loud" to "just about stock volume"

Improved engine sounds for all rotorwings

Improved blade visuals of rotors to flare up when spinning with blur

--

Fixed power loss during hover in rotors

Fixed sound problem on the Gemini rotors

Fixed reversed "open" and "close" labels on Size 2 cargo parts

Fixed file not found exception due to bad error

Fixed tail rotors not working as intended

Revised most of the IVAs other than Size 2 cockpits that isn't Viewer's as well as Mk3 (includes click-able IVA props, working instrument display)

Added Mk1 Inline Stabilizer for use with stabilizing VTOL aircrafts

*Revision will likely break the way it worked before, thrust reversals are removed, the functions are changed, etc.

--

Updated Firespitter to fix the sound only playing in one channel (working on lowering the volume of parts if I remember)

Updated Firespitter also fixed the missing CoT when using rotorwings

Added Mk0 Tail Connector*

Added Mk0 Tail Connector Short*

Added Mk0 Junior Liquid Fuel Fuselage*

Added Structural Hull S2 (2 Variants)**

Added Size 2 Cargo Ramp**

Added Size 2 Cargo Bay CRG-15**

Added KS-H1 Fixed Landing Gear, a landing gear for biplane designs

Added KS-V1 Fixed Landing Gear, a landing gear for helicopter designs (based on UH-60)

*can be attached and clipped halfway radially and be used as a creative razorback.

**sized 2.5m set for cargo management, like Mk3, but fits with existing parts

--

Fixed issue where Tiger engine was hard to select

Node added for the Half Mk2 Adapter for reasons unknown, it's now possible to add a boom behind the cockpit

Smoothed performance curves for early engines and gave a boost for them (now quite more powerful and can handle a little higher AoA)

Weight variations are now a thing in early engines, paired with the smoother curves and performance changes mentioned

Fixed node sizes on various parts (AccidentalDisassembly)

Added KT6C "Kitty" Turboshaft Engine, a tilt-rotor radial engine based on AW609, a VTOL Engine

Added J-85 "Tiger" Afterburning Turbofan based on F-5 Freedom Fighter/Tiger II, sized 0.625m

Added J-119 "Cheetah" Afterburning Turbofan based on F-22 Raptor

Added Nosecone Mk1 also based on the F-22 Raptor (qromodynmc)

--

Fixed Mk1 Intake having reversed intakeTransform

--

Early engines now all have significantly more powerful stationary thrust

Added Size 2 Radial Liquid Fuel Mount, the bulky thing on airliner wings

Added FAT wings A to G variants, Airliner type modular wings capable of holding fuel

Added Trailing Edge Two-slot Flap

Added Trailing Edge Slotted Flap

Added Leading Edge Krueger Flap

Added Leading Edge Slat Straight

Added S.P.O.I.L.E.R

Added Elevon 0, a halved Elevon 1 (Aerospacer)

--

Modified Size 2 Commercial Cockpit mesh to have a better nose

Fixed price of Junior Mk1 Fuel Tank (fourfa)

Fixed a misplaced CoL on a wing segment

Regulated wing segment prices

Fixed no hatch for Size 2 Viewer's Cockpit

Fixed Blank texture for Brand Decal on CFM56 to show up transparent texture instead of white and black

--

Additional changelog not added from last release:

Added ability to search for real names to see specific parts (i.e, Airbus, Falcon, Fighter, etc)

Fixed Size 2 Non-commercial cockpit to have only one crew

Added J-56 "Lotus" High-Bypass Turbofan Engine, based on Airbus A320's CFM-56

Added KV2-117A "Hippo" Turboshaft Engine based on Mi-8 Hip, as well as its tail rotor, KV2-117A Control Rotor

Added KV3-117 "Twinblade" Coaxial Turboshaft Engine, based on Kamov Ka-52

-

Fixed issue where navball will be reoriented in a wrong direction when reverting if Airplane Plus cockpit is used - for all cockpits

Fixed almost lack of roll on Size 2 cockpits

Fixed missing intakes for MK2 Non-commercial Cockpit

Fixed transparent IVA on droopnose (concorde) cockpit

Fixed badly placed doors for Size 2 Passenger Cabin IVA

Fixed and filled hollow colliders for cockpits to avoid problems with FAR

Fixed wrong mirror on Elevon 2B (WARNING: You will need to remake crafts with this or it will be rotated in the wrong direction for existing crafts)

-

Actually updated the Part Deleter's Guide

Added Size 2 Droopnose Cockpit based on Concorde (with animated nose droop)*

*No clickable cameras on IVA yet

-

Added Size 2 Crew Cabin, fits 16 kerbals, an Airline Cabin

Added Size 2 Liquid Fuel Fuselage, 2.5m sized full of Liquid Fuel alone

Added Structural Fuselage S2, a 2.5m kind of hollow hull, fitting for Airline hulls

Added Size 2 Passenger Door with mesh switch (Air Ramp and not). Goes with structural Fuselage

Added Mk1 Passenger Door mesh switch ramp option (aka, airstair/airramp)**

Added Small Nose Cone Stubby, a cute stubby nosecone

**A reminder that due to big kerbal colliders, they won't be able to EVA with only Passenger Door. Extend with a Junior Structural Fuselage to avoid blockage

**AirplanePlus hatches are box, not capsules. It won't fit on Mk1 Passenger Door for now due to a bigger collider. Even with Junior or Full Structural Fuselage

-

Added Kerbal Standard Agency as I forgot last release. Can now really be found on manufacturers tab

Fixed Mk2 Non-Commercial Cockpit (F-16) not showing up

Added MK1 Caged Inline Cockpit based on P-40 Warhawk

Added Mk2 Non-Commercial Cockpit based on F-16 Fighting Falcon (thanks to SkyKaptn's donations)

-

Added Elevon 2B, a bigger straight elevon compared to the default one

Added Wing Connector Type F-K, a smaller wing set, mostly halved the size of stock wings

Added Navigation Illuminator, a supposed navigation light

-

Fixed missing hatch for Mk1 Non-Commercial Cockpit

Fixed misaligned ladder for Mk1/0 Caged Inline Cockpit

Added alternative camera view for all existing cockpits, as well as new ones

Improved Mk1 Viewer's Cockpit IVA textures, as well as Mk1/0 Caged Inline Cockpit

-

Rebranded all parts to Kerbal Standard, all AP+ can now be found in one manufacturer tab

Added MK1 Business Cockpit based on Cessna Citation (1.25 to 0.625 size)

Added MK1 Non-Commercial Cockpit based on F-18 Hornet (No hatch yet, forgot)

Added MK1 Viewer's Cockpit II based on OH-6 Little Bird

-

Added Mk1 Junior Structural, a halved Mk1 Structural Fuselage, hollow

Added Mk1 Passenger Door, a half-sized structural fuselage with a hatch (animated)

-

Resized KT6A "Kitty" Turboprop engine, now a 0.625m engine

Added K76 "Predator" Turboprop Engine based on MQ-9 Predator B/Reaper as well as its tractor variant (OV-10 Bronco)*

Added L K55 "Gemini" Turboshaft Engine** based on CH-47 Chinook

Added K700 "Hawk" Turboshaft Engine based on UH-60 Black Hawk

*still needs the thrust to be reversed

**meshswitch capable to remove engines

-

Added Mk1 Cargo Bay CRG-50-1, a sliding door cargo bay

Added Mk1 Nose Trunk CRG-NT, cargo bay based off the front hull of Drones such as Predator, Reaper, Global Hawk etc.

Added MK1 Drone Core, almost similar function with stock MK2 Drone Core

Added FAT-T3R Aeroplane Main Wing, a non-swept aeroplane main wing based off C-130

Added Anti-Roll Landing Skids

-

Added Mk2/H Liquid Fuel Fuselage, a halved Mk2 fuselage.

Added Mk2/H to 1.25m Adapter, adapter from half Mk2 to 1.25

Added Mk2/H Flat Boom, a tail boom for Mk2/H

Added Mk2/H to Mk2 Adapter, adapter to regular Mk2 size

-

Fixed price similarities and inconsistencies

Fixed weight and rebalanced

Fixed MK1/0 Caged Inline Cockpit navball orientation change on revert

Recalculated Mk1 Junior Tank capacity

-

Increased a bit of stationary thrust for all engines.

Added KT6A "Kitty" Turboprop Engine based on TBM 900, contains a pusher variant*

Added RR K250 "Maverick" Turboshaft Engine** based on Bell 206, as well as its tail rotor, RR K250-S Control Rotor

Added K73 "Beluga" Turboshaft Engine based on Sikorsky S-64, as well as its tail rotor, K73-S Control Rotor

*still needs the thrust to be reversed

**meshswitch capable to remove engines

-

Added Mk1 Viewer's Cockpit based on Bell 206

Added MK1/0 Caged Inline Cockpit based on A6M "Zero"

Added Anti-Roll Landing Skids

-

Included Part Deleter's Guide in the zip for those who want to delete specific parts

-

Fixed bad sound loops and bad sounds over all

Fixed config complaints about errors and issues (ignitionthreshold, texture on meshswitching)

-

All engines will now have a small startup time before shooting off the runway

Added RR "Count" K.XI Engine based on Hawker Fury/Hawker Nimrod/Hawker Hart

Added "Ascender" variant to the MeshSwitch variants of K1710, a pusher design*

Added "Saab 21" variant as a MeshSwitch variant of KB 601, a pusher design*

*still needs the thrust to be reversed

-

Modified the folder structure to easily delete parts not wanted - folders are sorted by age

-

Early flight engines now have a lower speed limit and less responsive than Pre-modern engines

Added K-25V "Cyclone" Radial Engine based on Polikarpov I-153/I-16 (Contains MeshSwitch)

Added 8A "Spud" Engine based on SPAD S.VII

Added 9J "Baron" Rotary Engine based on Fokker DR.I (Contains MeshSwitch and Rotary Engine rotation)

-

Made for better tech tree support especially for early flight

Adjusted costs to better match other parts and economy when in career mode

-

Reconfigured engine performance curves, prepare to have a different aircraft setup

Normalized Engine Sounds to match KSP loudness a bit

Gave propeller and sound better synchronization on most engines

Added second type of short tail boom;

Added a variant to the K1710 "Whirlwind" Engine;

Fixed the "Kraken" Engine having a lot of drag;

Converted textures to DDS (previously MBM)