-Passive APAS snap offset changed to 60 degrees. Docking issues now corrected.

-SAW .mu file corrected animation. Colliders simplified to prevent other conflicts.

-APAS docking ports no longer gendered. Active can dock with active, but Passive is configured to not be able to dock with passive to match RL.

-P5/S5 Truss (Solar Array Wing Spacer Truss)

-Note that the RTAS docking ports are needed to be used on the P5 truss in order to get the proper spacing to clear the deployed SAWs. If not there will be a bit of visible clipping.

-Grapple Fixture (Tiny Docking port/greeble)

-Grapple Effector (Tiny Docking port)

-Grapple Fixture Standoff

Changes

-SAW animation changed a bit to clear the P5 truss. Nothing craft breaking.

-1/2 Resolutions textures updated per new changes.

-CLS patch updated to include APAS_P_Mk1-2.

-JAXA Experiment Logistics Module (ELM) and Joint Experiments Module (JEM) CFG fixes to allow transmission of science

• Added new attachment node to Experiment Logistics Module (ELM) on centerline opposite of existing node.

-Added search tags to Unity and Destiny equivalent modules

-1.2.2 Compatibility verified

-Docking ports tweaked for easier engagement. Staging disabled.

-Crew reports added to KHM 3-1, eX-R-S, and JAXA modules

-"JAXA Texture/Model Pass". Redone UVs and reduced texture map by 1/2. Porklike/BDB Treatment, Specular Map. Added new greebles as well.

-1/2 Resolutions textures updated per new changes.

-Kerbnet CFG edits added to the Z1 truss.

-SAW CFG tweaked.

-Node attach added to MRTAS docking ports.

Fixes

-CLS and KeepFit MM patches tweaked syntax.

Enhancements

-1.2 Compatibility

-New Categories (Coupling, Electrical, Thermal, Communication).

-KU Band (ModuleDataTransmitter,ModuleDeployableAntenna)

-Change temp limit of APAS and CBMs to 2000

-"APAS Texture/Model Pass". Redone UVs and reduced texture map by 1/2. Porklike/BDB Treatment, Specular Map

-"PMA Texture/Model Pass". Redone UVs and reduced texture map by 1/2. Porklike/BDB Treatment, Specular Map. Handrails Redone.

-1/2 Resolutions textures updated per new changes.

Fixes

-Quest Airlock: Rotated Model 180 along long axis, external airlock hatch facing “down”

-Solar Array Wing: Canister handrails needed smoothing.

-KHM 4-1: Endcap textures need the docking port texture 

-Corrected RemoteTech Patch to fix an error that deleted the stock transmitter module in non-stock antennas. Issue happens in installs that don't have RemoteTech.

-For the RemoteTech Issue, if you dont use RemoteTech, you can just delete this MM config from the CxAerospace/Station Parts folder instead of re-downloading the pack.

-Fixed USI-Life Support Patch. Replaced FOR tags with NEEDS tags.

-Yes, this is the second time I've done this hot fix. Should be the last time now (promise).

-Solar Array Wing

-Electronic Equipment Thermal Control System (EETCS) Radiator

-KHM 2.5M-1.25M Adapter

-1.25M APAS-Passive (Mk1-2)

-Long Spacer Truss (ITS)

-Integrated Equipment Assembly Truss (ITS)

-Rectangular Truss Attachment System (RTAS)- Active

-Rectangular Truss Attachment System (RTAS)- Passive

-Note these RTAs ports are tricky to use unless you are a veteran at docking. Forum Thread OP will get updated information regarding these

Enhancements

-Trunnion Pin received specular texture

-Z1 received normal/specular textures. Tray deployment animation reduced angle. Slight change in model to accept RTAS docking port (not craft breaking). grabbable handrails

-KU Band Antenna received normal/specular textures. Given surface attach node.

-1/2 Resolutions textures updated per new changes.

-Corrected RemoteTech Patch to fix an error that deleted the stock transmitter module in non-stock antennas. Issue happens in installs that don't have RemoteTech.

-For the RemoteTech Issue, if you dont use RemoteTech, you can just delete this MM config from the CxAerospace/Station Parts folder instead of re-downloading the pack.

-Fixed USI-Life Support Patch. Replaced FOR tags with NEEDS tags.

-Trunnion Pin/Scuff Plate. Surface attachable greeble.

Enhancements

-"USA Texture/Model Pass". Redone UVs and reduced texture map by 1/2. Porklike/BDB Treatment, Specular Map. Handrails Redone.

-"Airlock Texture/Model Pass". Redone UVs and reduced texture map by 1/2. Porklike/BDB Treatment, Specular Map. Handrails Redone.

-JAXA, APAS, and PMA handrail temporary color correction to match new USA Handrails. Models will be updated per Road Map. JAXA window temporary color correction to match USA texture.

-1/2 Resolutions textures updated per new changes.

-APAS and CBM colliders modified so that the guide fins are now usable. Active APAS no longer a gimmick. Much easier to align and obtain a hard dock.

Mod Support

-Corrected CLS Patch to work.

-Added TweakScale Patch.

-Added RemoteTech Patch for KU Band Antenna.

-Added USI-Life Support Patch.

• APAS-Active-L04F (flows with Tantares 0.9375m size standard)

• Manual Berthing Mechanism (Ring docking port made specifically for the Z1 Truss. And yes you can pass through it)

• Z1 Truss (Probe unit, reaction wheel, hollow internal for surface attaching parts)

• KU-Band Antenna

Mod Support

• Connected Living Spaces MM configuration files (check first post of forum thread for temp download forgot to pack with this release).

-Out of Beta Phase.

-Modification to License.

New Parts

-Added Active APAS. Includes deployable capture ring to allow soft docking. Use caution to not toggle once docked.

Enhancements

-General parts balance. Weight reductions/increases (majority of which decreased) to match closer to stock.

-1/2 Resolutions textures provided with download.

-Majority of EVA handles modeled on modules are now grabbable.

-New internal camera switches added to Joint Experiments Module (JEM)

Mod Support

-Corrected part name errors in KeepFit and Snacks! MM configuration files.

Bug fixes

-Reapplied Edge Split modifier to several EVA handles on Experiment Logistics Module (ELM).