Version 1.4.0.0 - Mexican Waterfalls Adapted

30 Jan 2022
Release for Kerbal Space Program [KSP 1.12.x]

DO A CLEAN INSTALL: DELETE EXISTING THEN RE-INSTALL

DO A CLEAN INSTALL:
DELETE EXISTING INSTALLATION THEN RE-INSTALL

Download from CurseForge

Waterfall Effects

Create <EnginesPlumeSWE.cfg>
Add stock waterfall effects
Thank you! 🚀 - @JamesErvin-5
Work-In-Progress
Requires to use:
- Waterfall
- Stock Waterfall Effects
Closes #52 - Stock Waterfall Effects

Localization

Create <es-mx.cfg>
Adds Mexican translation - thank you - @JamesErvin-5 ⚽
closes #50
updates #6

Lint Compatibility Patches

closes #65 - Lint Compatibility Patches
[Little-Leo.cfg] v1.0.1.0
- make footer one line
- closes #66 - [Little-Leo.cfg] v1.0.1.0
[Aerobee-jr.cfg] v1.0.1.0
- make footer one line
- closes #67 - [Aerobee-jr.cfg] v1.0.1.0
Update [EnginesPlumeSWE.cfg] v1.0.1.0
- Add header/footer
- Add license (for now it is CC BY-SA 3.0 Unported)
- Add ,StockWaterfallEffects to the :NEEDS
- Thank you to @JamesErvin-5 for submitting these patches
- closes #68 - Update [EnginesPlumeSWE.cfg] v1.0.1.0

Update X1

X1		diameter (m)	height (m)	math	radius (m)	m²	Liters
X1-body	cylinder	1.77	2.39	πr²h	0.885	5.88077	5880.78
X1-crew	cylinder	1.25	2.64	πr²h	0.625	3.23977	3239.77
X1-engine	cylinder	0.625	0.74	πr²h	0.3125	0.22703	227.03
X1-tail	cone	1.25	3.28	(πr²h)/3	0.625	1.34172	1341.73

closes #69 - Update X1
[tbee-x1-body]
- Add
  - DRAG_CUBE
  - [ModuleCargoPart]
    - type = cylinder
    - radius = 0.885m
    - height = 2.39m
    - volume = 5.880772 m³ // 2.932971
    - m³ x 1000L = m³
    - packedVolume = 6000
- closes #70 - [tbee-x1-body]
[tbee-x1-tail]
- Add
  - DRAG_CUBE
  - [ModuleCargoPart]
    - type = cone
    - radius = 0.625m
    - height = 3.28m
    - volume = 1.341722 m³
    - m³ x 1000L = m³
    - packedVolume = 1350
- closes #71 - [tbee-x1-tail]
[tbee-x1-crew]
- Add
  - DRAG_CUBE
  - [ModuleCargoPart]
    - type = cylinder
    - radius = 0.625 m
    - height = 2.64 m
    - volume = 0.876033 m³
    - m³ x 1000L = m³
    - packedVolume = 1000
- closes #72 - [tbee-x1-crew]
[tbee-x1-engine]
- Add
  - DRAG_CUBE
  - [ModuleCargoPart]
    - type = cylinder
    - radius = 0.625 m
    - height = 0.74 m
    - volume = 0.242236 m³
    - m³ x 1000L = m³
    - packedVolume = 300
- closes #73 - [tbee-x1-engine]

Update Bumper

file name		diameter (m)	height (m)	width (m)	math	radius (m)	m²	Liters
bumper-body	cylinder	0.625	1.09		πr²h	0.3125	0.33441	334.41
bumper-control	cylinder	0.625	0.09		πr²h	0.3125	0.02761	27.62
bumper-engine	cylinder	0.625	1.34		πr²h	0.3125	0.41111	411.11
bumper-engine-unclad	cylinder	0.625	1.33		πr²h	0.3125	0.40804	408.04
bumper-fin	rectangle	0.46	1.42	0.02	LHW	0.23	0.01306	13.07
bumper-nose	cone	0.625	2.36		(πr²h)/3	0.3125	0.24135	241.35

closes #77 - Update Bumper
[bumper-body.cfg]
- rename part cfg to use hyphen
- Add
  - DRAG_CUBE
  - [ModuleCargoPart]
    - type = cylinder
    - radius = 0.3125m
    - height = 1.09m
    - volume = 0.33441 m³
    - m³ x 1000L = m³
    - packedVolume = 350
    - stackableQuantity = 2
- closes #79 - [bumper-body.cfg]
[bumper-control.cfg]
- rename part cfg to use hyphen
- uncomment [ModuleReactionWheel]
  - Pitch/Yaw/Roll Torque = 0.1
  - consumes [ElectricChange] at a rate of 0.1
- Add
  - DRAG_CUBE
  - [ModuleCargoPart]
    - type = cylinder
    - radius = 0.3125m
    - height = 0.09m
    - volume = 0.02761 m³
    - m³ x 1000L = 27.62 m³
    - packedVolume = 30
    - stackableQuantity = 10
- closes #80 - [bumper-control.cfg.cfg]
[bumper-engine.cfg]
- rename part cfg to use hyphen
- Add
  - DRAG_CUBE
  - [ModuleCargoPart]
    - type = cylinder
    - radius = 0.3125m
    - height = 1.34m
    - volume = 0.41111 m³
    - m³ x 1000L = 411.11 m³
    - packedVolume = 425
    - stackableQuantity = 2
- closes #81 - [bumper-engine.cfg]
[bumper-engine-unclad.cfg]
- rename part cfg to use hyphen
- Add
  - DRAG_CUBE
  - [ModuleCargoPart]
    - type = cylinder
    - radius = 0.3125m
    - height = 1.33m
    - volume = 0.40804 m³
    - m³ x 1000L = 408.04 m³
    - packedVolume = 415
    - stackableQuantity = 2
- closes #82 - [bumper-engine-unclad.cfg]
[bumper-fin.cfg]
- rename part cfg to use hyphen
- Add
  - DRAG_CUBE
  - [ModuleCargoPart]
    - type = rectangle
    - x = 0.46m
    - y = 1.42m
    - z = 0.02m
    - volume = 0.01306 m³
    - m³ x 1000L = 13.07 m³
    - packedVolume = 14
    - stackableQuantity = 12
- closes #83 - [bumper-fin.cfg]
[bumper-nose.cfg]
- rename part cfg to use hyphen
- Add
  - DRAG_CUBE]
  - [ModuleCargoPart]
    - type = cone
    - radius = 0.3125m
    - height = 2.36m
    - volume = 0.24135 m³
    - m³ x 1000L = 241.35 m³
    - packedVolume = 250
    - stackableQuantity = 4
- closes #84 - [bumper-nose.cfg]

Update Taerobee

Taerobee		diameter (m)	height (m)	width (m)	math	radius (m)	m²	Liters
taerobee-adapter-short	trunc.cone	0.625	0.1	0.15625	(1/3)πh (r²+rR+R²)	0.3125	0.01790	17.9
taerobee-adapter-tall	trunc.cone	0.625	0.3	0.15625	(1/3)πh (r²+rR+R²)	0.3125	0.05369	53.69
taerobee-aerobee	cylinder	0.625	0.43		πr²h	0.3125	0.13192	131.93
taerobee-control	cylinder	0.625	0.1		πr²h	0.3125	0.03068	30.68
taerobee-decoupler	cylinder	0.625	0.19		πr²h	0.3125	0.05829	58.3
taerobee-despin	cylinder	0.625	0.1		πr²h	0.3125	0.03068	30.68
taerobee-fin-large	rectangle	0.36	0.72	0.02	LHW	0.1800	0.00518	5.19
taerobee-fin-small	rectangle	0.37	0.16	0.04	LHW	0.1850	0.00237	2.37
taerobee-nosecone	cone	0.625	0.98		(πr²h)/3	0.3125	0.10022	100.23
taerobee-parachute	cone	0.625	0.3		(πr²h)/3	0.3125	0.03068	30.68
taerobee-science	cylinder	0.625	0.3		πr²h	0.3125	0.09204	92.04
taerobee-sustainertank-3	cylinder	0.625	2.88		πr²h	0.3125	0.88357	883.58
taerobee-tinytim	cylinder	0.625	1.14		πr²h	0.3125	0.34975	349.75

closes #78 - Update Taerobee
[taerobee-adapter-short.cfg]
- Create part based on Squad's adapterSmallMiniShort
  - [rescaleFactor] = 0.5
  - [bulkheadProfiles] = size00,size0
  - keep variants
- add @Thumb
- Update Localization - <en-us.cfg>
- Add
  - DRAG_CUBE]
  - [ModuleCargoPart]
    - type = trunc.cone
    - radius = 0.3125 m
    - Radius = 0.15625 m
    - height = 0.1 m
    - volume = 0.0179 m³
    - m³ x 1000L = 17.9 m³
    - packedVolume = 18
    - stackableQuantity = 20
- closes #87 - [taerobee-adapter-short.cfg]
[taerobee-adapter-tall.cfg]
- Create part based on Squad's adapterSmallMiniTall
  - [rescaleFactor] = 0.5
  - [bulkheadProfiles] = size00,size0
  - keep variants
- add @Thumb
- Update Localization - <en-us.cfg>
- Add
  - DRAG_CUBE]
  - [ModuleCargoPart]
    - type = trunc.cone
    - radius = 0.3125 m
    - Radius = 0.15625 m
    - height = 0.3 m
    - volume = 0.05369 m³
    - m³ x 1000L = 53.69 m³
    - packedVolume = 55
    - stackableQuantity = 8
- closes #88 - [taerobee-adapter-tall.cfg]
[taerobee-aerobee.cfg]
- rename part cfg to use hyphen
- change [bulkheadProfiles] from size0 to size00
- FX randsomed until [ModuleEnginesFX] changed back to [ModuleEngines]; FX returned unharmed
- Added [EngineType] = LiquidFuel to [ModuleEngines]]
- Add
  - DRAG_CUBE]
  - [ModuleCargoPart]
    - type = cylinder
    - radius = 0.3125 m
    - height = 0.43 m
    - volume = 0.13192 m³
    - m³ x 1000L = 131.93 m³
    - packedVolume = 150
    - stackableQuantity = 5
- closes #89 - [taerobee-aerobee.cfg]
[taerobee-control.cfg]
- Rename part cfg to use hyphen
- Change [bulkheadProfiles] from size0 to size00
- Change [ModuleCommand] EC consumption from 0.001 to 0.006 re: early tech worse than 0.005 (21.5/h)
- Add [ModuleSAS] - no level
- Add [ModuleReactionWheel]
  - PitchTorque = 0.5
  - YawTorque = 0.5
  - RollTorque = 0.5
  - torqueResponseSpeed = 11
  - consumes [ElectricCharge] at a rate of 0.01 re: early tech - worse than 0.0003
- Updates[ModuleDataTransmitter]
  - [packetInterval] set to 1.0, was 0.6
  - [packetSize] set to 2, was 1
  - [antennaPower] set to 5000, was 50000
- Resource [ElectricCharge] upped to 75, was 5 re: same size as Z-100 but earlier tech and other things in part
- Add
  - DRAG_CUBE]
  - [ModuleCargoPart]
    - type = cylinder
    - radius = 0.3125 m
    - height = 0.1 m
    - volume = 0.03068 m³
    - m³ x 1000L = 30.68 m³
    - packedVolume = 32
    - stackableQuantity = 12
- closes #90 - [taerobee-control.cfg]
[taerobee-decoupler.cfg]
- rename part cfg to use hyphen
- Change [bulkheadProfiles] from size0,srf to size00,srf
- Add
  - DRAG_CUBE]
  - [ModuleCargoPart]
    - type = cylinder
    - radius = 0.3125 m
    - height = 0.19 m
    - volume = 0.05829 m³
    - m³ x 1000L = 58.3 m³
    - packedVolume = 60
    - stackableQuantity = 8
- closes #91 - [taerobee-decoupler.cfg]
[taerobee-despin.cfg]
- rename part cfg to use hyphen
- change [bulkheadProfiles] from size0 to size00
- Resource [MonoPropellant] amount changed to 3.0 from 1.5
- [ModuleSAS] consumption rate updated from 0.05 to 0.25
- Add
  - DRAG_CUBE]
  - [ModuleCargoPart]
    - type = cylinder
    - radius = 0.3125 m
    - height = 0.1 m
    - volume = 0.03068 m³
    - m³ x 1000L = 30.68 m³
    - packedVolume = 35
    - stackableQuantity = 10
- closes #92 - [taerobee-despin.cfg]
[taerobee-fin-large.cfg]
- rename part cfg to use hyphen
- Add
  - DRAG_CUBE]
  - [ModuleCargoPart]
    - type = rectangle
    - x = 0.36m
    - y = 0.72m
    - z = 0.02m
    - volume = 0.00518 m³
    - m³ x 1000L = 5.19 m³
    - packedVolume = 6
    - stackableQuantity = 12
- closes #93 - [taerobee-fin-large.cfg]
[taerobee-fin-small.cfg]
- rename part cfg to use hyphen
- Add
  - DRAG_CUBE]
  - [ModuleCargoPart]
    - type = rectangle
    - x = 0.37m
    - y = 0.72m
    - z = 0.04m
    - volume = 0.00237 m³
    - m³ x 1000L = 2.37 m³
    - packedVolume = 3
    - stackableQuantity = 20
- closes #94 - [taerobee-fin-small.cfg]
[taerobee-nosecone.cfg]
- rename part cfg to use hyphen
- change [bulkheadProfiles] from size0 to size00
- Add
  - DRAG_CUBE]
  - [ModuleCargoPart]
    - type = cone
    - radius = 0.3125 m
    - height = 0.98 m
    - volume = .010022 m³
    - m³ x 1000L = 100.25 m³
    - packedVolume = 125
    - stackableQuantity = 4
- closes #95 - [taerobee-nosecone.cfg]
[taerobee-parachute.cfg]
- rename part cfg to use hyphen
- change [bulkheadProfiles] from size0 to size00
- Updated [attachRules] from 1,0,1,0,0 to 1,0,0,1,0
- Added [buoyancyUseCubeNamed] = PACKED
- Added FX
  - [fx_gasBurst_white] = 0.0, 0.0, 0.0, 0.0, 1.0, 0.0, decouple
  - [sound_decoupler_fire] = decouple
- Updated [maxTemp] from 2000 to 2250 re: prototype
- Added [emissiveConstant] = 0.7
- Changed [crashTolerence] from 12 to 8
- Added [preferredStage] = PARACHUTESTAGE
- [ModuleParachute]
  - [clampMinAirPressure] = 0.04
  - [deploymentSpeed] set to 0.12 was 1
  - [semiDeploymentSpeed] set to 0.5 was 1
  - [chuteMaxTemp] = 650
- [ModuleDragModifier]
  - [dragModifier] set to 1.25 was 1
- [ModuleDecouple]
  - [ejectionForcePercent] = 100
  - [fxGroupName] = decouple
  - [menuName] = #TBEE-decoup-menu
  - [stagingEnableText] = #TBEE-decoup-enable
  - [stagingDisableText] = #TBEE-decoup-disable
- Added [ModuleTestSubject], copied from MK1
- Add
  - DRAG_CUBE]
  - [ModuleCargoPart]
    - type = cone
    - radius = 0.3125 m
    - height = 0.3 m
    - volume = 0.03068 m³
    - m³ x 1000L = 30.68 m³
    - packedVolume = 35
    - stackableQuantity = 12
- closes #96 - [taerobee-parachute.cfg]
[taerobee-science.cfg]
- rename part cfg to use hyphen
- change [bulkheadProfiles] from size0 to size00
- Add
  - DRAG_CUBE]
  - [ModuleCargoPart]
    - type = cylinder
    - radius = 0.3125 m
    - height = 0.3 m
    - volume = 0.09204 m³
    - m³ x 1000L = 92.04 m³
    - packedVolume = 100
    - stackableQuantity = 4
- closes #97 - [taerobee-science.cfg]
[taerobee-sustainertank-3.cfg]
- rename part cfg to use hyphen
- change [bulkheadProfiles] from size0 to size00
- Add
  - DRAG_CUBE]
  - [ModuleCargoPart]
    - type = cylinder
    - radius = 0.3125 m
    - height = 2.88 m
    - volume = 0.88357 m³
    - m³ x 1000L = 883.58 m³
    - packedVolume = 900
    - stackableQuantity = 1
- closes #98 - [taerobee-sustainertank-3.cfg]
[taerobee-tinytim.cfg]
- rename part cfg to use hyphen
- change [bulkheadProfiles] from size0 to size00
- FX randsomed until [ModuleEnginesFX] changed back to [ModuleEngines]; FX returned unharmed
- Added [EngineType] = SolidBooster to [ModuleEngines]
- ADD FX
  - [fx_exhaustSparks_yellow] = 0.0, -0.17, 0.0, 0.0, 1.0, 0.0, running
  - [fx_smokeTrail_medium] = 0.0, -0.17, 0.0, 0.0, 1.0, 0.0, running
  - [sound_explosion_low] = flameout
- Adjust [entryCost] = 50 from 0
- Change [category] = Engine from Propulsion
- Add [heatConductivity] = 0.06 note: 1/2 default
- [skinInternalConductionMult] = 4.0
- [emissiveConstant] = 0.5 note: yes, it's white. But let's claim it's an emissive white...
- Change
  - [maximum_drag] from 0.3 to 0.2
  - [crashTolerance] from 8 to 7
  - [maxTemp] from 3400 to 2000
- Add [ModuleJettison]
- Adjust [SolidFuel] resource
  - [amount] to 35 initially 10
  - [maAmount] to 35 initially 10
  - math:
    - volume of Part in L = 349.75
    - divide by 50 for units (ratio taken from stock solidBooster RT-10)
    - multiple by 5 units per unit for SolidFuel
    - = 34.95 units of [SolidFuel]
- Add
  - DRAG_CUBE]
  - [ModuleCargoPart]
    - type = cylinder
    - radius = 0.3125 m
    - height = 1.14 m
    - volume = 0.34975 m³
    - m³ x 1000L = 349.78L
    - packedVolume = 400
    - stackableQuantity = 1
- closes #99 - [taerobee-tinytim.cfg]

Status

#25 - 7ranceaddic7 adoption- contributed by zer0Kerbal
#26 - merge in tythos adoption- contributed by zer0Kerbal
#27 - Peter-JY-a adoption- contributed by zer0Kerbal
#28 - Peter-JY-100 adoption- contributed by zer0Kerbal
#29 - tk-313 adoption- contributed by zer0Kerbal
#30 - 1.3.0.0 archive adoption- contributed by zer0Kerbal
#32 - 1.3.9.9 adoption adoption- contributed by zer0Kerbal
#49 - Create es-mx.cfg- contributed by JamesErvin-5
#51 - Create EnginesPlumeSWE.cfg issue: compatibility/patch, issue: config, type: feature, type: request, state: approved- contributed by JamesErvin-5
#53 - upstream changes type: upstream- contributed by zer0Kerbal
#74 - X1 updates issue: config, type: fix- contributed by zer0Kerbal
#85 - Revert "Update Bumper"- contributed by zer0Kerbal
#86 - Update Bumper issue: config- contributed by zer0Kerbal
#101 - Update taerobee 1.4.0.0 issue: config- contributed by zer0Kerbal
#1 - Adoption Legal MumboJumbo adoption
#2 - Adoption Documentation adoption
#3 - Release 1.3.9.9-adoption adoption
#4 - Adoption - GitHub adoption
#5 - Adoption - social media adoption
#7 - Localization - English (United States) <en-us.cfg>
#8 - Localization - Russian (Русский) <ru.cfg>
#23 - Merge in other forks
#33 - Thumbnails adoption
#34 - add antenna to both control parts
#35 - move art assets to Assets adoption
#36 - Update decoupler adoption
#37 - update English Localization <en-us.cfg> adoption
#39 - Update sustainer tank adoption
#40 - Update Bumper body adoption
#41 - Update Bumper engine adoption
#42 - Update Bumper engine unclad adoption
#43 - Update Bumper Nose adoption
#44 - Update X1 Body adoption
#45 - Update X1 Tail adoption

See More

Changelog Summary for more details of changes : See ChangeLog
Discussions and news on this mod: See Discussions or KSP Forums
Known Issues for more details of feature requests and known issues : See Known Issues

Localization

English

![Mexican][MX] Mexican (Mexicano)

Russian (Русский) [incomplete]

your translation here

HELP WANTED - See the README in the Localization folder for instructions for adding or improving translations. GitHub push is the best way to contribute. Additions and corrections welcome!