DaMichel's Fuselage (DMF) An aero parts mod adding adding seven (7) stock-alike flat fuselage parts. /mod/2340/DaMichel%27s%20Fuselage%20%28DMF%29 DaMichel's Fuselage (DMF) 1.1.0.2 for Kerbal Space Program Released Fuselage version KSP version CKAN listed License CC BY-NC-SA 3.0

Version 1.1.0.2 -Superglue and Dusting

  • cleaned part.cfg's of extraneous // comments
  • added side nodes in a B9partswitch patch
  • updated changelog to use updated KERBALCHANGELOG formatting.
  • updated B9PartSwitch patches to use localization

Kerbal Space Program 1.8.1
#3

]]>
Mon, 09 Mar 2020 02:23:31 https://spacedock.info/mod/2340/DaMichel%27s%20Fuselage%20%28DMF%29/download/1.1.0.2 https://spacedock.info/mod/2340/DaMichel%27s%20Fuselage%20%28DMF%29
DaMichel's Fuselage (DMF) 1.1.0.1 for Kerbal Space Program Released Fuselage version KSP version CKAN listed License CC BY-NC-SA 3.0

Version 1.1.0.1 - Spit'n'Polish

  • thank you to KottabosGames for the review and suggestions!
  • thank you to BenjaminCronin for pointed out decorative right brace in changelogs. wite-out applied.
  • Also dangling VERSION. superglued applied.
  • adjusted strength and temperatures of all parts.
  • added explosionPotential = 0.5
  • added missing buoyancy = 0.1
  • [DM-fuselage-intake.cfg] has the same specs like the Ram Air Intake.
  • added missing thermalMassModifier = 12.0
  • added missing machcurve to ModuleResourceIntake on intake
  • adjusted intakeSpeed from 10 to 15
  • adjusted RESOURCE IntakeAir amount/maxAmount from 0.2 to 2.0
  • adjusted cost/entryCost from 2000/1600 to 2680/14000
  • adjusted maximum_drag from 0.2 to 0.3
  • adjusted minimum_drag from 0.2 to 0.3
  • added missing ModuleAnimateHeat
  • added missing stackSymmetry = 2
  • [DM-fuselage-cone]
  • basing stats on: Advanced Nose Cone - Type B (pointyNoseConeB)
  • adjusted scale = 0.9375, 0.9375, 0.9375 from 1.0, 0.9375, 1.0 noted by Kottabo
  • adjusted entryCost to 8000 from 1600
  • corrected typo on maximum_drag should have been 0.1 instead it was 0.11
  • adjusted angularDrag to 0.25 from 0.5
  • adjusted maxTemp to 2000 from 2900
  • added: size2 to bulkheadProfiles = mk1, size2, srf
  • added: explosionPotential = 0.5
  • added: CoMOffset = 0.0, 0.0, -0.313
  • added: CoPOffset = 0.0, 0.0, -0.313
  • added: CoLOffset = 0.0, 0.0, -0.313
  • added: CenterOfDisplacement = 0.0, -0.2, 0.0
  • added: thermalMassModifier = 6.0
  • added: emissiveConstant = 0.95
  • added: buoyancy = 0.1
  • added ModuleAnimateHeat
  • [DM-fuselage-tailboom]
  • Based upon Tail Connector A (airplaneTailB)
  • adjusted entryCost to 2500 from 1600
  • adjusted cost to 500 from 200
  • adjusted crashTolerance to 8 from 20
  • adjusted maxTemp to 2200 from 2900
  • added: thermalMassModifier = 6.0
  • added: emissiveConstant = 0.95
  • added: explosionPotential = 0.5
  • added: CoMOffset = 0.0, -1.5, 0.0
  • added: CoPOffset = 0.0, -1.5, 0.0
  • added: CoLOffset = 0.0, -1.5, 0.0
  • added: CenterOfDisplacement = 0.0, -1.5, 0.0
  • added: buoyancy = 0.1
  • added: explosionPotential = 0.5
  • added: ModuleAnimateHeat
  • [DM-fuselage-X1] DMF - Flat Fuel Tank X1
  • based upon Mk2 Rocket Fuel Fuselage Short(mk2FuselageShortLFO)
  • adjusted: entryCost to 15000 from 1600
  • adjusted: crashTolerance to 50 from 10
  • adjusted: maxTemp to 2500 from 2900
  • added: buoyancy = 0.1
  • added: srf to bulkheadProfiles = mk1, srf
  • added: mirrorRefAxis = 0, 0, -1
  • added: ModuleLiftingSurface
  • [DM-fuselage-X2] DMF - Flat Fuel Tank X2
  • based upon Mk2 Rocket Fuel Fuselage(mk2FuselageLongLFO)
  • adjusted: entryCost to 18000 from 1600
  • adjusted: crashTolerance to 50 from 10
  • adjusted: maxTemp to 2500 from 2900
  • added: buoyancy = 0.1
  • added: srf to bulkheadProfiles = mk1, srf
  • added: mirrorRefAxis = 0, 0, -1
  • added: ModuleLiftingSurface
  • [DM-fuselage-front] DMF - Flat End
  • based upon (noseConeAdapter) NCS Adapter
  • adjusted: entryCost to 8000 from 600
  • adjusted: mass to 0.1 from 0.11
  • adjusted: angularDrag from 0.25 // 0.5
  • adjusted: maxTemp to 2400 from 2900
  • added: explosionPotential = 0.5
  • added: CenterOfDisplacement = 0.0, -0.2, 0.0
  • added: thermalMassModifier = 6.0
  • added: emissiveConstant = 0.95
  • added: buoyancy = 0.1
  • added: bulkheadProfiles = mk1, size0
  • added: ModuleAnimateHeat
  • [DM-fuselage-adapter] DMF - Flat to 1.25m Round Adapter
  • based upon (mk2SpacePlaneAdapter) Mk2 to 1.25m Adapter
  • adjusted: entryCost to 14000 from 1600
  • adjusted: minimum_drag to 0.1 from 0.3
  • adjusted: angularDrag to 2 from 1
  • adjusted: crashTolerance to 50 from 10
  • adjusted: breakingForce to 50 from 200
  • adjusted: breakingTorque to 50 from 200
  • adjusted: maxTemp to 2500 from 2900
  • added: srf to bulkheadProfiles = mk1, size1, srf
  • added: buoyancy = 0.1
  • added: emissiveConstant = 0.8
  • added: explosionPotential = 0.5
  • added: ModuleLiftingSurface
  • adjusted breakingForce on all parts from 50 to 200 (except where noted)
  • adjusted breakingTorque on all parts from 50 to 200(except where noted)
  • adjusted B9fuelswitch to have LF come after Structural instead of LFO

Kerbal Space Program 1.8.1

]]>
Sun, 23 Feb 2020 05:09:29 https://spacedock.info/mod/2340/DaMichel%27s%20Fuselage%20%28DMF%29/download/1.1.0.1 https://spacedock.info/mod/2340/DaMichel%27s%20Fuselage%20%28DMF%29
DaMichel's Fuselage (DMF) 1.1.0.0 for Kerbal Space Program Released Fuselage version KSP version CKAN listed License CC BY-NC-SA 3.0

Version 1.1.0.0 - Fresh Coat of Paint: Fuselage

  • adopted for curation by zer0Kerbal
  • for Kerbal Space Program (KSP) 1.9 (might work for earlier)
  • converted to use Localization - translations welcomed through GitHub Push Request
  • updated license to CC BY-NC-SA 3.0
  • file structure and modernization
  • added Kerbal Changelog
  • added Readme
  • created github repo
  • created SpaceDock entry
  • created CKAN entry
  • created Curseforge entry
  • created Forum post
  • created .json
  • modernized part.cfg
  • added DM-RFC (Radial Fuel Cell) - which is an air breathing, liquid fuel powered generator producing 1.5 EC/s
  • added ODFC patch
  • created DM-RFC texture
  • many little changes to patches/parts.

Kerbal Space Program 1.8.1

]]>
Mon, 17 Feb 2020 18:35:32 https://spacedock.info/mod/2340/DaMichel%27s%20Fuselage%20%28DMF%29/download/1.1.0.0 https://spacedock.info/mod/2340/DaMichel%27s%20Fuselage%20%28DMF%29