• Re-added the Connected Living Spaces compatibility patch that got left out of v2.0.5

• Added Waterfall FX compatibility patch - converts all engines and RCS thrusters except for SRBs to Waterfall FX.
• Fixed texture issue with the 5m Amun-Ra (SLS) Fairing. The texture will now appear correctly in 1.12+.
• Updated the SSMEMount part to use transform-based attachment nodes.

• Added Connected Living Space (CLS) compatibility patch (will only work if CLS is installed).

ISS SAW Fix thanks to Hachiro * Re-exported the ISS SAW (Solar Array Wing) part * Now uses a single attachment node (no longer surface attach) * PAW text updated for easier readability and more informative operation * Deploying the Array plays the full deployment animation once, while the panels won't actually rotate independently and collect sunlight until they are activated. * Should remain deployed regardless of a packing/unpacking operation, so no more having to redeploy after the game packs and unpacks the vessel.

Hotfix * Re-exported the following parts to add a basic flat normal as KSP apparently no longer gracefully ignores no normal map for "Bumped..." shaders. * EUS * EUSDecoupler * ICPS * DCSS5m * DCSS5mDecoupler * DCSS4m * DCSS4mDecoupler * AresI * AresIIU * AresIDecoupler * Pyrios * PyriosNoseCone Everything should be back to looking normal.

Removed: * SLS Engine Mount - texture was removed, and isn't really necessary any longer. * Extra TGA textures that got left in the SRBs folder.

• Changed the tech required for the Altair Landing Leg so that they will appear in the career tech tree (Thanks to NapalmPK for catching this.)

Removed:

* External Tank Nose Cone
* External Tank
* External Tank End Cap
    * These three were replaced with two tanks (see Additions)
* File:  "_ShadowWorks_RealChutes.cfg" Removed
* File:  "_ShadowWorks_FSTextureSwitching.cfg" Removed
* SLS 5m - 3.25 m Adapter (Orion can be attached to the EUS using the SLS 5m Fairing Base No Payload variant.

Additions:

* MOARdV Avionics Systems compatibility patches adding functioning MFDs and other controls to the Orion and Altair IVAs.  Also adds a camera and docking radar to the NASA Docking System (NDS) 0.9375m docking port.
* ModulePartVariant:
    * SLS Core Stage
        * Bare Orange Insulation
        * Black and White Painted
    * ICPS Decoupler
        * Bare Orange Insulation
        * Black and White Painted
    * EUS
        * Bare Orange Insulation
        * Black and White Painted
    * EUS Decoupler
        * Bare Orange Insulation
        * Black and White Painted
    * External Tank Liquid Fuel Tank
        * Bare Orange Insulation
        * STS-1 White
        * Jupiter (DIRECT) Liquid Fuel Tank with Engine Mount (Mesh)
    * External Tank Oxidizer Tank
        * Bare Orange Insulation
        * STS-1 White
        * Jupiter (DIRECT) Oxidizer Tank (Mesh)
    * Shuttle Orbiter Radial Decoupler
        * Bare Orange Insulation
        * STS-1 White
    * Orion Pod
        * Mirrored
        * White
        * EFT-1 Black
    * Orion CM Cap
        * Mirrored
        * White
        * EFT-1 Black
    * ICPS
        * ICPS (Mesh)
        * DCSS 5m (Mesh)
    * SLS 5m Fairing Base
        * Orion attach nodes to accommodate the Altair Lander
        * Orion attach nodes for no/small payloads
        * Orion attach nodes for tall payloads
* Jupiter (DIRECT) Upper Stage Tank
* Earth Departure Stage Tank
* Jupiter Upper Stage Engine Mount (6x symmetry)
* Earth Departure Stage Engine Mount (1 engine & 2 engine variants, uses ModulePartVariant)
* Earth Departure/Jupiter Upper Stage interstage decoupler
* Altair Ascent Stage (w/integrated RCS and ascent engine)
* Altair Decoupler (w/airlock for crew EVA)
* Altair Descent Stage (w/integrated engines)
* Altair RCS Quad (rcs quads for the descent stage)
* Altair Landing Legs (must set to "Gears" Action Group to use the "g" hotkey)
* SRB Aft Separation Motor (mounts on aft skirt of 4-segment, 5-segment, and Black Paladin SRBs
* 4m Delta Cryogenic Second Stage
* 5m Delta Cryogenic Second Stage (ICPS without the Orion adaptor)
* Delta IV Medium decoupler
* RL10A
* Shuttle Orbiter radial decoupler
* 4-segment/5-segment SRB radial decoupler
* External Tank Oxidizer tank
* External Tank Liquid Fuel tank
* Ares I Payload Fairing Base

Updates: (Nearly Complete Overhaul)

* Orion Launch Abort System was separated into two (2) separate parts, the Abort Motor, and the Jettison Motor.
* Orion Pod:  Remodeled to add detail.
* Orion CM Cap:  Remodeled to add detail.
* Orion Heatshield:  Updated model, given mirrored finish
* Orion Chutes:  Made into single chute part that is attached to the Orion Pod directly.
* Orion CM Decopuler:  Remodeled.
* Orion Service Module:  Remodeled to add detail.  All RCS pods have been integrated with the SM, and attach nodes added for easier attachment of solar panels.
* Orion Solar Panels:  Added attach node for easier attachment to SM
* Orion SM Decoupler:  Remodeled to add detail.
* Orion SM Fairing:  Remodeled to add detail and improve staging of the petals.
* ICPS:  Remodeled, 5m DCSS is a variant of this part, added flag decals
* ICPS Decoupler: Remodeled to add detail.
* SLS Core Stage:  Remodeled to add detail.  Integrated the SLS Engine Mount.
* Exploration Upper Stage:  Remodeled to add detail.
* Exploration Upper Stage Decoupler:  Remodeled to add detail.
* 4-Segment, 5-Segment, and Dark Knight SRBs:  Remodeled to add detail.
* SRB Nose Cone:  Remodeled to add detail.
* Pyrios Nose Cone:  Remodeled to add detail.
* Delta IV CBC:  Remodeled to add detail.
* RS-68:  Remodeled to add detail.
* GEM-60:  Remodeled to add detail, and a gimbal-able nozzle.
* RS-25:  Remodeled to add detail.
* RL10B:  Remodeled to add detail, and add an extendable nozzle.
* RL10C:  Remodeled to add detail.
* F-1B:  Remodeled to add detail.
* J-2X:  Remodeled to add detail.
* Pyrios booster:  Remodeled to add detail.
* Ares I Upper Stage:  Remodeled to add detail.
* Ares I Adapter:  Remodeled to add detail, added integrated separation motors.
* 2.5m and 3.75m to Orion Adapters:  Remodeled to add detail.
* SLS Fairing Base:  Remodeled to add detail.  Added integrated decouplers, 1 for attaching payloads that is not activated by staging, and another for the Orion that is activated by staging the fairing.  Added attach nodes for the Orion SM Fairing.
* Delta IV Payload Fairing:  Remodeled to add detail.  Added a payload fairing for the 4m DCSS.

———————

• Corrected an issue with _ShadowWorks_RealChutes.cfg that could cause problems if RealChutes is not installed.

• Fixed the Odyssey Airlock to actually add crew capacity so that it can be used as an airlock

• Changed all Space Station modules to remove the MODEL{} node to help prevent the scaling bug from cropping up.