TweakScale Rescale Everything /mod/127/TweakScale TweakScale for Kerbal Space Program Released
  • Adding 1.875 scale as default (being now a Stock size on MH, it makes sense to properly acknowledge it). Suggested by Tyko.
    • Closing issue #3
  • Adding support for Stock Alike Station Parts. Courtesy of Speadge.
    • Closing issue #8
  • Fixed a critical craft corruption (even flying ones) as TweakScale is sometimes being injected twice (or even more) into a part. This patch does not fix the duplicity, but prevent your crafts from being corrupted once a fix is applied (yeah - fixing the bug would cause craft corruption without this patch!)
    • Closing issue #20

    Another Unholy interaction between modules (Kraken Food) was detected that would mangle your savegames and crafts. Things still work until the problem is fixed (by installing, deleting or updating an add'on!) when then your KSP installment will be sane but all your savegames and crafts with TweakScale parts will get reset to defaults - yeah, you can't fix the problem or things get worse. This version of TweakScale "mangles further" the affected crafts and savegames so when things are fixed, your crafts preserve the TweakScale settings without harm. THIS DOES NOT FIX THE PROBLEM, as this is beyond the reach of TweakScale - but it at least prevents you from losing your crafts and savegames once the problem happens and then is later fixed.

    Special procedures for recovering mangled installments once the TweakScale are installed (triggering the MM cache rebuilding) are possible, but keep your savegames backed up. And DON`T SAVE your crafts once you detect the problem. Reach me on Forum for help.

    On the other hand, however, this version still drops support in runtime for some problematic parts. Any savegame with such problematic parts scaled will have them "descaled". This is not a really big problem as your game was going to crash sooner or later anyway - but if you plan to return to such savegame later when TweakScale will fully support that parts again, it's better to backup your savegames!

    Keep an eye on the Known Issues file.

    Tue, 19 Feb 2019 18:04:22
    TweakScale for Kerbal Space Program Released
  • KSP 1.6 (partial) support certified.
  • Actively reverting support in runtime for parts with problematic or unsupported modules.
    • Closing issue #9
    • Closing issue #11
    • Closing issue #12
  • Lifting the Max KSP restriction on the .version file.
  • Updating Module Manager to 3.1.1
  • BACKUP YOUR SAVEGAMES . Some parts will loose TweakScale support, and if such parts are being used your crafts will have problems. Support for these parts will be restored in the future, but until there you will need to play without TweakScaling them.

    Tue, 01 Jan 2019 21:23:43
    TweakScale for Kerbal Space Program Released
  • 2018-1027: (Lisias) for KSP 1.4.1+; 1.5
    • KSP 1.5 support certified.
    • Reverting some misunderstood versioning.
    • Moving the repository to the Official Headquarters
    • Some performance (and type safety) enhancements
    • Fixes on the MX-3L Hermes (NFT) as proposed by NachtRaveVL
    • Fixed an issue when Making History is present.
      • With additional failsafe measure
    • Bumping Release to assume official maintenance and mark the URL change.
  • ]]>
    Sun, 28 Oct 2018 01:02:25
    TweakScale v2.3.12 for Kerbal Space Program Released
  • configs for new parts
  • fix for exceptions
  • fix for solar panels
  • recompile for KSP 1.4.2
  • ]]>
    Mon, 16 Apr 2018 21:45:21
    TweakScale v2.3.10 for Kerbal Space Program Released
  • don't overwrite stuff if the exponent is zero
  • recompile against KSP 1.4.1
  • ]]>
    Wed, 14 Mar 2018 22:31:16
    TweakScale v2.3.9 for Kerbal Space Program Released
  • fix interaction with stock ModulePartVariants
  • ]]>
    Fri, 09 Mar 2018 21:28:17
    TweakScale v2.3.8 for Kerbal Space Program Released recompile for KSP 1.4 a few patches for new parts

    Known issues:

    the new stock texture switch messes up attachment nodes on scaled parts
    (first switching and then scaling seems to work)
    Wed, 07 Mar 2018 21:53:34
    TweakScale v2.3.7 for Kerbal Space Program Released
  • recompile for KSP 1.3.1
  • only complain about negative dry mass if the number is significant
  • ]]>
    Fri, 13 Oct 2017 21:53:27
    TweakScale v2.3.6 for Kerbal Space Program Released
  • recompile for KSP 1.3
  • lots of player-submitted patches (thanks eberkain, mikeloeven, OliverPA77)
  • set SRB thrust exponent to 3 (so both TWR and burntime are preserved now)
  • added a few null checks
  • scaling support for resource lists (for drills and converters)
  • Fix: don't scale mass if the part has a MFT module
  • TWEAKSCALEEXPONENTS should now affect not only the mentioned module but also derived modules (e.g. the exponent for ModuleRCS also applies for ModuleRCSFX)
  • ]]>
    Sun, 28 May 2017 00:38:24
    TweakScale v2.3.4 for Kerbal Space Program Released
  • fix exponent for stock ModuleGenerator
  • found a way to write dryCost of the prefab early enough (fixes a cost issue with KIS)
  • functions to ask the prefab about stats of scaled parts (meant for KIS)
  • ]]>
    Mon, 23 Jan 2017 19:21:57
    TweakScale v2.3.3 for Kerbal Space Program Released
  • recompile for KSP 1.2.2
  • fix cost bug with fsfuelswitch (ignore resource cost because FSfuelSwitch takes it into account)
  • added a bit of documentation
  • ]]>
    Sat, 17 Dec 2016 18:09:14
    TweakScale v2.3.2 for Kerbal Space Program Released
  • update patches for RLA-Stockalike, OPT
  • exponents for ModuleRCSFX
  • remove an obsolete exponent
  • remove patches for relay antennas since scaling of their main function does not work (which is relaying signals when the antenna is part of an unloaded vessel)
  • ]]>
    Thu, 03 Nov 2016 00:46:39
    TweakScale v2.3.1 for Kerbal Space Program Released
  • exponent for groundHeightOffset (fixes landing gears clipping the runway at launch)
  • fix for node positions reverting when cloning a part
  • antennas: refresh range display
  • antennas: tweak exponent (so that downscaled antennas are a bit less overpowered)
  • ]]>
    Fri, 21 Oct 2016 17:57:27
    TweakScale v2.3 for Kerbal Space Program Released
  • fix for wheel colliders
  • fix wheelMotor torque and ec consumption
  • CrewCapacity: has a configurable exponent now
  • CrewCapacity: additional seats are not shown in the editor (stock limitation)
  • scaling support for FloatCurve (for wheel torque)
  • scaling support for and int values (for CrewCapacity)
  • fix scaling of input/outputResources (new stock "resHandler", e.g. consumption of reaction wheels)
  • move workaround for stock UI_ScaleEdit bug into the plugin
  • ]]>
    Sat, 15 Oct 2016 16:03:27
    TweakScale v2.2.13 for Kerbal Space Program Released
  • recompile for KSP 1.1.3
  • fix for solar panels
  • rewrite of chainScaling: propagate relative scaling factor to child parts
  • ]]>
    Fri, 24 Jun 2016 22:52:02
    TweakScale v2.2.12 for Kerbal Space Program Released
  • scaling of crew capacity (hardcoded to use the mass exponent for now)
  • Fix patches scale crewed parts with an exponent of 2 for crew and mass (not realistic but fits better to stock balance than 3). In any case mass/kerbal is hardcoded to be preserved.
  • scaling of the IVA overlay
  • support for new firespitter biplane
  • support for HLAirships module (thanks SpannerMonkey)
  • some missing patches for B9 (thanks BlowFish) (did some reordering but still need to sort through the content)
  • fixed a few patches
  • reorganize some patches into their own folder (B9, Squad including nasa and spacePlanePlus)
  • small optimisation: disable partModule in flight if not scaled
  • ]]>
    Fri, 20 May 2016 00:26:12
    TweakScale v2.2.11 for Kerbal Space Program Released
  • remove obsolete IFS exponents
  • fix bug in partMessage for MFT
  • expose API via the part message system
  • fix for mirrored parts
  • workaround for tweakable bug: extra scaleFactor 500% for the free scaletypes (so the range from 200-400% is usable again)
  • don't interfere if other mods illegaly write part.mass. Print a warning in this case
  • fix thrust for moduleRCS (new maxFuelFlow exponent like for moduleEngines)
  • ]]>
    Thu, 12 May 2016 23:41:41
    TweakScale v2.2.10 for Kerbal Space Program Released
  • basic wheel scaling: scaled wheels work but still behave strange. They roll, are pretty close to touching the ground, and are able to bounce.
  • make sure the exponents are applied before notifying other mods through the API (needed for interaction with FAR)
  • MFT support changed to TweakScale using their API (instead of the other way round)
  • tweaked downscaled science parts to be a little more expensive
  • ]]>
    Thu, 05 May 2016 21:37:01
    TweakScale v2.2.9 for Kerbal Space Program Released
  • fix for drag cube scaling
  • update right click menu after rescale
  • recompile for 1.1.2
  • cleanup for mass scaling
  • ]]>
    Sat, 30 Apr 2016 17:50:30
    TweakScale v2.2.7.2 for Kerbal Space Program Released
  • fix scaling of the root part
  • ]]>
    Sun, 24 Apr 2016 17:59:53
    TweakScale v2.2.7.1 for Kerbal Space Program Released
  • update for 1.1
  • Workaround for the camera breaking (root part scaling is still broken)
  • support for new stock parts
  • shrinking science and probe cores makes them more expensive (only changed for stock so far)
  • update for the OPT v1.8 test release
  • ]]>
    Sat, 23 Apr 2016 15:49:54
    TweakScale v2.2.6 for Kerbal Space Program Released
  • Support for NF-Construction
  • update for NFT Octo-Girders
  • fix for infinite loop between TweakScale and MFT
  • fix for engineer's report mass display
  • ]]>
    Thu, 18 Feb 2016 14:17:17