Bug Fixes & Enhancements - Fixed issue where switching Play Modes would cause some files to not be renamed and cause all kinds of fun for players... NOTE: For the changes to take effect, you'll need to switch your Play Mode to some mode other than the current one, then switch it to the desired mode.

Classic Stock - Added new Classic Stock omni converters: Propellium Distiller, Oxium Distiller, Snack Grinder (requres Snacks), Soil Dehydrator (requires Snacks). - Gondo Hab, Gondo Lab, and Gondo Office all default to Omni templates.

Bug Fixes & Enhancements - Recompiled for KSP 1.4.3 - Improved resource summary in the geology lab. - Fixed a situation where resource distribution that wouldn't distribute resources. - Adjusted Classic Stock resource densities to reflect the 5-liter standard used by most stock resources. - Adjusted Classic Stock storage capacities to reflect the 5-liter standard used by most stock resources. These changes will affect new parts and when you reconfigure an existing part. - Classic Stock is now the default Play Mode for new installs of WBI mods. Existing games are unchanged.

Bug Fixes And Enhancements - Adjusted atmosphere and velocity curves for the electric propellers and fans- thanks JadeOfMaar! :) - Fixed Hooligan Labs' lift issues with the HL-10L Dirigible Section. - Increased the Nuclear Gyro power output to 2000 EC/sec and tweaked its thermal parameters. - Nuclear Gyro stores 20,000 ElectricCharge instead of 4,500 LiquidFuel. - HL-10 Hangar Deck now has a battery template. - Increased the WB-50 "Jet Stream" thrust output to 500kn

ARP Icons Added new Alternate Resource Panel icons courtesy of JadeOfMaar. These look great! :)

BARIS IS OFF BY DEFAULT! You'll have to opt-in via the Settings->Difficulty->BARIS tab.

With BARIS, converters and drills now have wear and tear, which is indicated by the part's Quality rating. They're unlikely to break during their normal design life, but they can start to break down after you exceed their design life. If you perform maintenance on them, you can reduce the chance that they'll break. A broken drill or base part won't function, which can be either annoying or life threatening depending upon the mods you have installed. Once you fix the part, it will continue to function, but its design life will be reduced- unless you disable that option.

Bug Fixes & Enhancements - Bug fixes in Kerbal Actuators and animation improvemts - thanks Nertea! :) - Fixed missing textures.

This release fulfills my initial vision for the mod; an airship with electric motors and a nuclear reactor for flying on other planets! It also makes it possible to create really big airships with huge hangar bays.

NOTE: The Cyclone no longer requires Firespitter. You will find two versions of it in the catalog. One is marked (DEPRECATED). BE SURE TO UPDATE YOUR VAB/SPH CRAFT WITH THE NEW VERSION! It's the one without (DEPRECATED) in its title. Next release the (DEPRECATED) Cyclone won't be available in the catalog, but won't break any craft in the field.

New Parts - Half-Side Flight Deck: one side is omitted to enable the creation of large hangar decks. - Half-Side Aircraft Elevator: one side is omitted to enable the creation of large hangar decks. - Top-Side Flight Deck: both sides are omitted to enable the creation of large hangar decks. - GTG-250-H: This part is a gas turbine generator that produces up to 250 EC/sec. Its output is controlled by the throttle setting. If the Buffalo mod is installed, then this part is automatically deprecated and unavailable to new vessels; there is an equivalent in the Buffalo mod. - Nuclear Gyro Ring: Combine the current gyro ring with a nuclear reactor capable of generating 1000 EC/sec, and you have the nuclear gyro ring. Just watch out for the sticker shock. - WB-50 "Jet Stream" Electric Prop: This Size 2 (2.5m) stack-mounted electric propeller produces huge amounts of thrust- and needs huge amounts of ElectricCharge as well. - WB-25 "Twister" Electric Prop: This is a smaller Size 1 (1.25m) stack-mounted electric propeller.

Bug Fixes & Enhancements - The HL10 Side Elevator has new mesh options: Twin Elevator Railings, Left Rail, and Right Rail. For these options, the back wall of the elevator is omitted; great for making large hangars. - Increased power output on the Gyro Ring. - The Cyclone no longer depends upon Firespitter. NOTE: the Firespitter version of the Cyclone is still included, but only if you have Firespitter installed. It is marked (DEPRECATED). BE SURE TO REBUILD YOUR VAB/SPH CRAFT WITH THE NEW VERSION! - Fixed issues with forward/reverse thrust on the ducted fan. - Fixed issues with the HL-10 Gyro Ring not producing ElectricCharge.

Bug Fixes & Enhancements - Gondola Storage Units can now participate in Pathfinder's resource distribution. - Fixed Crash To Desktop issues experienced at startup that are associated with Kerbal Actuators. - Revised Kerbal Actuators GUI.

Bug Fixes & Enhancements - WBT Update - The GondoHab, GondoLab, and GondoGarden can now be broken down for easy transport and set up as office buildings, just like the GondOffice. The new ability is only available to new constructions. - Fixed the VAB/SPH part icon for the GondOffice. - The GondOffice's conference phone can now change the internal light color from white, blue, and off. - Fixed IVA overlay positioning of the GondOffice.

• S.A.F.E.R. : The Safe Affordable Fission Engine with Radiators generates ElectricCharge for your spacecraft needs. It is based upon the real-world SAFE - 400 reactor created by NASA.

• GondOffice: This alternate habitat module serves as a briefing room for your vessels- or as a transportable office space for the executive on the go. It can be disassembled into a storage box and transported by a kerbal (NOTE: there is a KIS bug where it requires several kerbals to pull an item out of storage). Once assembled, you can give it straight sidings to make it more building-like, and you can connect offices together to make a large building. If this works out, I'll modify the other bison modules (hab, lab, & greenhouse) with similar functionality. HINT: Click the top of the conference phone to turn on/off the lights.

• GondoStairs: These external stairs give you access to the upper floors of your buildings. Just unpack them and attach them to the end of a Bison module.

Sample Craft - Added the KV-8 Kestrel, a nuclear-powered tilt-fan aircraft. BE SURE TO WARM UP THE REACTOR BEFORE TAKING OFF!

Bug Fixes & Enhancements - Added name tag to the HL-10 rudder; it is in the same place as the mission flag, and upside down relative to the mission flag. - Updated TAC-LS greenhouse configuration for continual food production.

Wide Width The Flight Deck System parts (Flight Deck, Flight Deck Fairing, Aircraft Elevator, Side Elevator) now have the ability to toggle their meshes between Standard Width and Wide Width. Wide width changes the models so that their sides are perpendicular to the hangar deck, giving you the full 10-meter width to store your vehicles. In Wide width mode, there's just enough room to store a stock Aeris 3A in the hangar.

Sample Craft Found in the Heisenberg/SampleCraft folder are 3 sample airships and one support plane: - Heisenberg (SPH): made entirely from the parts pack and stock parts, she has two first-class cabins, two passenger cabins, and can carry cargo as well. - Macon (SPH): a modified Heisenberg-class airship, the Macon has been turned into a flying aircraft carrier. Macon has a wider hangar deck than her sister ship, the Akron. - Skydancer (VAB): This airship is equipped with rocket booster to achieve orbit. She has an array of science equipment on her back, two hab modules, to science labs, a pair of greenhouses, and a power pack of Nerve engines. Just launch Skydancer into orbit, refuel her, and fly the airship to Laythe. - Aeris 3V (SPH): This is a highly modified Aeris 3A that's equipped with VTOL engines and an underbelly docking port. It's a nice complement to the Macon.

Bug Fixes - Fixed sound effects issue with the cargo lift. - You can now select the default image for the Plasma Screen in addition to screens in the Screenshots folder. - Moved the kPad and plasma screens to the Utility tab.

Bug Fixes & Enhancements - All configs in the Spaces folder have been moved to their appropriate folder under Parts. Now it's even easier to remove what you don't use. - IVAs are showing properly again.